I replaced my 3 S&B scopes that l really liked, with Swaro after the new S&B Eurotrash bean counters started screwing everyone over & l had 2 guides l knew get rammed by them, so will never have...
Liked On: 01-01-2022, 09:46 PM
Start with customer service dept at aa.swarovskioptik.com customerservice@swarovskioptik.com They should direct you to swaro nz. They should handle it for you. My EL range button replacement in...
Liked On: 01-01-2022, 09:44 PM
Aperture sight would save a fair bit
Liked On: 01-01-2022, 09:38 PM
Constant exposure to water, he will work it out on his own
Liked On: 01-01-2022, 09:33 PM
This is me 243 BSA that I got from ryansonghurst. 186962 186963 186964 186965
Liked On: 01-01-2022, 11:23 AM
I saw "Mamba Mag" a new company with affiliation to MDT, mention that they will be making steel magazines for the mini action. I believe also an alloy or steel bottom metal.
Liked On: 01-01-2022, 11:19 AM
I just Joogle searched it- Put bolt in rifle Close bolt Lift bolt part way Apply safety Lift bolt and remove Can now unscrew rear shroud with captive 2 piece firing pin/spring combo. Need to...
Liked On: 01-01-2022, 10:26 AM
With the mini cutting the mag release in half solves that issue, the hact trigger can't really be improved on and the 5 round mag doesn't really interfere with handling the 10 is another story all...
Liked On: 01-01-2022, 07:53 AM
I love the mini. I've a 223 and it keeps the freezer full. I have no problems with the mag except for the stupid mag release. Why they let Homer Simpson decide where to place it is beyond me. I...
Liked On: 01-01-2022, 07:52 AM
beautiful stock.....
Liked On: 01-01-2022, 04:06 AM
yeah fair enough bud...was rather puzzled by you asking re 2213 in first place. I looked in aliant manual and nothing at all for the reloader 23 for .270 at all same with IMR paper manual years...
Liked On: 01-01-2022, 04:06 AM
https://www.grtools.de/doku.php As good or better than Quickload. Best part is its free.
Liked On: 01-01-2022, 04:05 AM
what the heck do you need quickload for????? the short answer is use the 2213.......
Liked On: 01-01-2022, 04:04 AM
I have never used any Inox products but the MX3 spray should be fine. WD40 and CRC 556 are also OK but my preference is for a fine layer of non-gumming oil like 3 in 1, or US military LSA (Lubricant,...
Liked On: 31-12-2021, 11:14 PM
This is the Viscount action. I have spare parts for this model if you need anything. I have 4 rifles with this action.
Liked On: 31-12-2021, 11:14 PM