Had a look through one at the Sika show. Was looking at getting one because they are very light and compact for a ffp and has illumination. However, as mentioned their very short mounting length and...
Liked On: 09-02-2025, 07:33 PM
Used the ttsx in 308 a lot. As others have already said they work best going really fast. For the animals you are talking about at bush ranges I would drop down to the 110 grainer. It can be driven...
Liked On: 26-01-2025, 04:06 PM
Used the ttsx in 308 a lot. As others have already said they work best going really fast. For the animals you are talking about at bush ranges I would drop down to the 110 grainer. It can be driven...
Liked On: 26-01-2025, 03:41 PM
Maybe try a heavier suppressor before you go that route. I mean if you just want to try a new cartridge in that rifle go for it but I am confident that if you are running a dpt suppressor if you put...
Liked On: 24-01-2025, 09:04 AM
Maybe try a heavier suppressor before you go that route. I mean if you just want to try a new cartridge in that rifle go for it but I am confident that if you are running a dpt suppressor if you put...
Liked On: 24-01-2025, 08:46 AM
I have gotten excellent velocities and accuracy with 75grain eldm and 2206h in three different 1-8 twist t3's (one 18.5, one 20 inch barrel and one 22 inch). They were all very accurate out to 400 in...
Liked On: 15-01-2025, 10:40 PM
With regards to muzzle flip I have found that running a heavier suppressor than is currently fashionable really helps. Either full stainless or a dpt with a few stainless baffles to bring the weight...
Liked On: 12-01-2025, 01:19 PM
With regards to muzzle flip I have found that running a heavier suppressor than is currently fashionable really helps. Either full stainless or a dpt with a few stainless baffles to bring the weight...
Liked On: 08-01-2025, 04:15 PM
If you are going truly superlight (like a Kimber or lighter) I can tell you from experience that you will really struggle to see the fall of the shot with anything larger than 243/6mm Creedmoor in...
Liked On: 08-01-2025, 04:15 PM
With regards to muzzle flip I have found that running a heavier suppressor than is currently fashionable really helps. Either full stainless or a dpt with a few stainless baffles to bring the weight...
Liked On: 05-01-2025, 10:03 PM
If you are going truly superlight (like a Kimber or lighter) I can tell you from experience that you will really struggle to see the fall of the shot with anything larger than 243/6mm Creedmoor in...
Liked On: 05-01-2025, 03:57 PM
If you are going truly superlight (like a Kimber or lighter) I can tell you from experience that you will really struggle to see the fall of the shot with anything larger than 243/6mm Creedmoor in...
Liked On: 05-01-2025, 03:25 PM
They are definitely here.
Liked On: 30-12-2024, 01:29 PM
Funny you mention this, I had two less than impressive results with the 75grain eldm. Both deer were close (30m and 10m approx). Animals were recovered but the time taken to recover them (without a...
Liked On: 19-09-2024, 08:59 PM
Funny you mention this, I had two less than impressive results with the 75grain eldm. Both deer were close (30m and 10m approx). Animals were recovered but the time taken to recover them (without a...
Liked On: 19-09-2024, 08:19 PM