chainsaw
Member

3156 Likes

Page 131 of 211 First ... 3181117118119120121122123124125126127128129130131132133134135136137138139140141142143144145181 ... Last

• Jump to page:

1. 
   veitnamcam liked post by chainsaw On thread : No hunting under level 3

   I can think of several people who are deserving of the above mentioned sanitisation treatment.... and a lot of people would no doubt stump up "pay for view".

   Liked On: 22-04-2020, 05:41 PM

2. 
   scottrods liked post by chainsaw On thread : Water Proof Pants/ leggings

   Stoney Creek Dreambull are excellent, not super light weight but pack down pretty small.

   Liked On: 20-04-2020, 03:20 PM

3. 
   Shearer liked post by chainsaw On thread : The model 7 in your life

   And the bolts on the wrong side :pacman:

   Liked On: 19-04-2020, 08:41 PM

4. 
   stagstalker liked post by chainsaw On thread : Reloader 16 vs Reloader 17

   A few years back used RL17 in my 7mm08 with 150gn LRABs for 2750 fps. Recently tried some RL16 in same rifle with 150 ELDx - sweet spot also came out at 2750 fps. Not quite a head to head...

   Liked On: 17-04-2020, 09:12 PM

5. 
   Shearer liked post by chainsaw On thread : Thank you NZ Hunter!

   Aye, sure looked like a Texas heart shot to me. And that 2nd shot was so fast it had to be some one else backing up the shooter? And one or both must have hit the CNS to drop it like it did.

   Liked On: 16-04-2020, 09:44 PM

6. 
   Moa Hunter liked post by chainsaw On thread : What's considered "lightweight "

   Bare rifle = "6lbs and under" is a common rule of thumb to define light weight. Too many variables in scopes, rings, suppressors, etc when you start adding those in. Choice of scope will have a...

   Liked On: 16-04-2020, 12:17 PM

7. 
   Shearer liked post by chainsaw On thread : What's considered "lightweight "

   Bare rifle = "6lbs and under" is a common rule of thumb to define light weight. Too many variables in scopes, rings, suppressors, etc when you start adding those in. Choice of scope will have a...

   Liked On: 15-04-2020, 05:16 PM

8. 
   jakewire liked post by chainsaw On thread : Double grouping .... likely causes ?

   Thanks for the comments and suggestions. Been down most or all of these points. I’ve narrowed down the field : Stock is professionally bedded, including pillar bedding Actions screws tight, torque...

   Liked On: 14-04-2020, 05:18 PM

9. 
   csmiffy liked post by chainsaw On thread : Double grouping .... likely causes ?

   Ladder test is great place to start in determining safe and max pressures for rifle/powder/ combo. But don’t tell you much if anything about accuracy. In my case above ladder tests done at start, but...

   Liked On: 13-04-2020, 01:24 PM

10. 
    Cordite liked post by chainsaw On thread : Double grouping .... likely causes ?

    A couple of pics - before and after fixing the mag box binding issue. Confirmed my diagnosis of the cause for double grouping. This one before - a few different loads & pills all showing 2 shots in...

    Liked On: 13-04-2020, 08:16 AM

11. 
    Sideshow liked post by chainsaw On thread : Double grouping .... likely causes ?

    A couple of pics - before and after fixing the mag box binding issue. Confirmed my diagnosis of the cause for double grouping. This one before - a few different loads & pills all showing 2 shots in...

    Liked On: 13-04-2020, 07:13 AM

12. 
    Spitfire liked post by chainsaw On thread : Z5/VX5 etc

    Photo of Z5 wearing the 2 turn turret attached 135816

    Liked On: 12-04-2020, 11:59 AM

13. 
    Micky Duck liked post by chainsaw On thread : Double grouping .... likely causes ?

    Thanks for the comments and suggestions. Been down most or all of these points. I’ve narrowed down the field : Stock is professionally bedded, including pillar bedding Actions screws tight, torque...

    Liked On: 12-04-2020, 09:50 AM

14. 
    Steelisreal liked post by chainsaw On thread : Double grouping .... likely causes ?

    Thanks for the comments and suggestions. Been down most or all of these points. I’ve narrowed down the field : Stock is professionally bedded, including pillar bedding Actions screws tight, torque...

    Liked On: 12-04-2020, 09:17 AM

15. 
    6x47 liked post by chainsaw On thread : Z5/VX5 etc

    yes, you lose the zero stop, but means sfa cos you set up the scope on 20moa rail or inserts on Zee rings then at 200 yrd zero you're only about half a turn away from bottoming out anyways. So you...

    Liked On: 11-04-2020, 09:26 PM

Page 131 of 211 First ... 3181117118119120121122123124125126127128129130131132133134135136137138139140141142143144145181 ... Last

• Jump to page: