chainsaw
Member

3867 Likes

Page 74 of 258 First ... 246061626364656667686970717273747576777879808182838485868788124174 ... Last

• Jump to page:

1. 
   chainsaw liked post by Von Gruff Knives On thread : Various Knives

   Was talking to my wood guy and the adiction kicked in so will have these scales sets coming https://i.imgur.com/2QOlGlPl.png https://i.imgur.com/dvIHta9l.png https://i.imgur.com/t4416Jul.png...

   Liked On: 03-03-2022, 01:16 PM

2. 
   chainsaw liked post by Gillie On thread : New range laws and shooting on unregistered ranges

   Its a little tricky. Until Police actually release their "Exposure draft" Shooting Range Manual i am not allowed to distribute it. I can talk to whats in it in general though... In the soon to...

   Liked On: 03-03-2022, 11:35 AM

3. 
   chainsaw liked post by 7mmsaum On thread : what causes differences in OAL with a comparator ?

   Everything mentioned above including Neck tension variances There is a fix regardless of the cause Don’t load to final length first time Load 5 or 10 thou short on them all Then measure...

   Liked On: 02-03-2022, 04:06 PM

4. 
   chainsaw liked post by Southerner223 On thread : Decisions Scope

   For that budget cant really go past a swaro Z3, either a 3-9 or 3-10 (technically a 3.3-10) They come with holdover reticle which will see you out to 400 if needed that 10% of the shots your...

   Liked On: 02-03-2022, 02:47 PM

5. 
   chainsaw liked post by Happy Jack On thread : Convince me

   I have a Molesworth block in 3 weeks time and I was supposed to go in with a mate from Hanmer as we are both locals. He has had to pull out so its just me, me and me going in. I'm extending an...

   Liked On: 02-03-2022, 12:58 PM

6. 
   chainsaw liked post by dogmatix On thread : New range laws and shooting on unregistered ranges

   In theory yes, the 'range' will need to follow templates and be certified. Practically, no one is going to pay attention except for the organised PRS style competition shoots on farms. Its a...

   Liked On: 28-02-2022, 01:04 PM

7. 
   chainsaw liked post by Taupohunter On thread : New range laws and shooting on unregistered ranges

   Then I guess you are now doing "pest control"

   Liked On: 28-02-2022, 01:03 PM

8. 
   chainsaw liked post by grandpamac On thread : Help with 2208 or Varget load 130gn Speer SPBT in 7-08

   Greetings chainsaw, I recently chronographed the 140 grain Remington Coreloked projectile with 42.5 grains of AR2208 in a 19" 7mm-08 barrel at 2,710. Hodgdon lists a max of 43.5 grains of AR2208/...

   Liked On: 27-02-2022, 09:49 AM

9. 
   chainsaw liked post by DBD On thread : Help with 2208 or Varget load 130gn Speer SPBT in 7-08

   The book shows 130gr Speer Spitzer boat tail #1624, ar2208 @ 44gr with av2844 "very accurate ragged hole". I can't remember if it was a 20" or 22" barrel. Hope it helps, I'm in the process of doing...

   Liked On: 26-02-2022, 08:02 PM

10. 
    chainsaw liked post by Marty Henry On thread : OK I almost shit myself

    Sows can be as aggressive as boars they only lack the tusks but can still bite. Close in their speed is amazing and like a cannon ball take your legs out spin and give you a good seeing to. You...

    Liked On: 26-02-2022, 08:16 AM

11. 
    chainsaw liked post by Tahr On thread : Help with 2208 or Varget load 130gn Speer SPBT in 7-08

    Could be but no pressure signs in my gun.

    Liked On: 25-02-2022, 07:20 PM

12. 
    chainsaw liked post by Cigar On thread : Help with 2208 or Varget load 130gn Speer SPBT in 7-08

    Gordon's Reloading Tool reckons 43gr of 2208/Varget is getting up there, and should give about 2560fps. 44gr is starting to get into the red zone using the default values. 45.5gr of CFE223 should...

    Liked On: 25-02-2022, 07:20 PM

13. 
    chainsaw liked post by Tahr On thread : Help with 2208 or Varget load 130gn Speer SPBT in 7-08

    I use 44.5 grns 2206 and 130 speers from an 18" tube. Good load.

    Liked On: 25-02-2022, 07:20 PM

14. 
    chainsaw liked post by zimmer On thread : Barrel break-in

    That's a strange sweeping statement. Bartlein, Kreiger, Lilja, Brux for example, all excellent barrel makers that I rate highly, all have break-in procedures. The most outspoken non break-in...

    Liked On: 24-02-2022, 03:46 PM

15. 
    chainsaw liked post by Moa Hunter On thread : Barrel break-in

    I think it depends on how good the quality of the barrel is, so there are a range of correct answers depending on the barrel. A match grade barrel prob doesnt need break in. Carry on doing what you...

    Liked On: 24-02-2022, 03:42 PM

Page 74 of 258 First ... 246061626364656667686970717273747576777879808182838485868788124174 ... Last

• Jump to page: