Chilli_Dog
Member

190 Likes

Page 3 of 13 First 12345678910111213 Last

• Jump to page:

1. 
   Cordite liked post by Chilli_Dog On thread : Tinting epoxy

   There are lots of things you can use, I used liquid orange fabric dye mixed into epoxy to fix an indicator lens There is some good info on it here...

   Liked On: 05-04-2020, 09:36 AM

2. 
   takbok liked post by Chilli_Dog On thread : DIY Carbon Fiber Rifle Stock

   In additon to some of what others have said you can do pretty budget vacuum bagging, I have used the plastic bags from mattresses, cut out and taped to the top of the mold. You have to make sure its...

   Liked On: 07-03-2020, 08:47 AM

3. 
   gadgetman liked post by Chilli_Dog On thread : Scope rings - Steel vs Aluminium

   You dont have to agree, however steel has an elastic modulus of around 210GPa 7075 t6 is around 70 GPa, no where near as stiff. Your bike frame analogy is confusing section properties with material...

   Liked On: 05-03-2020, 11:11 PM

4. 
   veitnamcam liked post by Chilli_Dog On thread : Scope rings - Steel vs Aluminium

   You dont have to agree, however steel has an elastic modulus of around 210GPa 7075 t6 is around 70 GPa, no where near as stiff. Your bike frame analogy is confusing section properties with material...

   Liked On: 05-03-2020, 08:42 PM

5. 
   takbok liked post by Chilli_Dog On thread : DIY Carbon Fiber Rifle Stock

   Do you have any pictures of the tabs for the butt joint? You could probably save a fair bit of weight by vacum bagging it.... then it's just a small step to a one piece stock with a latex bladder

   Liked On: 01-03-2020, 09:02 PM

6. 
   davetapson liked post by Chilli_Dog On thread : .22lR Norinco JW15

   Just need a JW15 set up clinic and shoot now

   Liked On: 22-01-2020, 09:44 PM

7. 
   Rated M for Magnum liked post by Chilli_Dog On thread : Jw15 modifications

   Nothing particularly special here, after collecting my 22 that had been in Dads gun safe for many years it suddenly felt very short and not particularly comfortable to hold. First step was stripping...

   Liked On: 01-12-2019, 01:47 PM

8. 
   csmiffy liked post by Chilli_Dog On thread : Gave the Lithgow No1 Mk3 a good clean today...

   When I did the stock on my M82 (just kidding TX2000) I mixed acetone with lime to make a paste and spread that over the wood, when it was dry I brushed it into the bin. Takes a lot of the old oil out...

   Liked On: 01-12-2019, 09:42 AM

9. 
   Moa Hunter liked post by Chilli_Dog On thread : Gave the Lithgow No1 Mk3 a good clean today...

   When I did the stock on my M82 (just kidding TX2000) I mixed acetone with lime to make a paste and spread that over the wood, when it was dry I brushed it into the bin. Takes a lot of the old oil out...

   Liked On: 01-12-2019, 08:43 AM

10. 
    Cordite liked post by Chilli_Dog On thread : Gave the Lithgow No1 Mk3 a good clean today...

    When I did the stock on my M82 (just kidding TX2000) I mixed acetone with lime to make a paste and spread that over the wood, when it was dry I brushed it into the bin. Takes a lot of the old oil out...

    Liked On: 01-12-2019, 08:37 AM

11. 
    Cordite liked post by Chilli_Dog On thread : Coolest Air-Powered Weapon?

    745mm its a pistol, good luck getting a PCP pistol into NZ

    Liked On: 31-08-2019, 10:40 PM

12. 
    Moa Hunter liked post by Chilli_Dog On thread : .410 and slugs for a bail gun?

    The Barnaul slugs are like that, and even then they are in a plastic sabot. A couple of .375-.395 round balls would probably be better

    Liked On: 06-08-2019, 09:28 AM

13. 
    dannyb liked post by Chilli_Dog On thread : Jw15 modifications

    Got a little bit more done on this, had a go at stippling the stock, out of all the bits and pieces around the place that I found one of those cheap diamond burrs in the dremel worked the best, just...

    Liked On: 02-07-2019, 09:04 PM

14. 
    dannyb liked post by Chilli_Dog On thread : .22lR Norinco JW15

    Na just the one, It didnt take that long, it was just an experiment really with some bits of wood left over from fixing a window. It is basically glued together from two pieces (around the receiver),...

    Liked On: 02-07-2019, 09:03 PM

15. 
    janleroux liked post by Chilli_Dog On thread : .22lR Norinco JW15

    I extended the wooden one I had, and made a complete stock (and new trigger) for the other one 114468 114469

    Liked On: 01-07-2019, 11:38 PM

Page 3 of 13 First 12345678910111213 Last

• Jump to page: