Chilli_Dog
Member

190 Likes

Page 5 of 13 First 12345678910111213 Last

• Jump to page:

1. 
   Tommy liked post by Chilli_Dog On thread : Delisle Carbine

   Home made 410 99015

   Liked On: 18-11-2018, 07:29 PM

2. 
   gadgetman liked post by Chilli_Dog On thread : Gadgetmans Induction Annealer

   I have a few blocks of UHMWPE that I got from the offcuts bin at Ludoici or Mulford engineering or ELP or whoever they are now, relatively cheap but really depends on what is there when you go in

   Liked On: 05-11-2018, 08:47 AM

3. 
   Tangobravo liked post by Chilli_Dog On thread : Rimu + Carbon Fiber + Hacksaw Blade = Machete/Seax

   Just a quick one, need to do some tree trimming around the house so knocked this up. Power hacksaw blade, turns out they are M2 HSS which means I cant heat treat it but its probably not a bad...

   Liked On: 01-11-2018, 08:15 PM

4. 
   40mm liked post by Chilli_Dog On thread : Rimu + Carbon Fiber + Hacksaw Blade = Machete/Seax

   Just a quick one, need to do some tree trimming around the house so knocked this up. Power hacksaw blade, turns out they are M2 HSS which means I cant heat treat it but its probably not a bad...

   Liked On: 01-11-2018, 07:36 PM

5. 
   Frogfeatures liked post by Chilli_Dog On thread : Rimu + Carbon Fiber + Hacksaw Blade = Machete/Seax

   Just a quick one, need to do some tree trimming around the house so knocked this up. Power hacksaw blade, turns out they are M2 HSS which means I cant heat treat it but its probably not a bad...

   Liked On: 01-11-2018, 07:32 PM

6. 
   Cordite liked post by Chilli_Dog On thread : 410 Enfield

   948229482494825

   Liked On: 11-09-2018, 01:49 PM

7. 
   Cordite liked post by Chilli_Dog On thread : 410 Enfield

   Almost done, I need to make a spacer to go between the wood work and the back of the suppressor tube, because of the angle on the back of this it needs to be relived at the front so it can be taken...

   Liked On: 11-09-2018, 01:49 PM

8. 
   Micky Duck liked post by Chilli_Dog On thread : 410 Enfield

   948229482494825

   Liked On: 10-09-2018, 09:58 PM

9. 
   Micky Duck liked post by Chilli_Dog On thread : 410 Enfield

   Almost done, I need to make a spacer to go between the wood work and the back of the suppressor tube, because of the angle on the back of this it needs to be relived at the front so it can be taken...

   Liked On: 10-09-2018, 09:58 PM

10. 
    Preacher liked post by Chilli_Dog On thread : 410 Enfield

    Almost done, I need to make a spacer to go between the wood work and the back of the suppressor tube, because of the angle on the back of this it needs to be relived at the front so it can be taken...

    Liked On: 10-09-2018, 09:37 PM

11. 
    SixtyTen liked post by Chilli_Dog On thread : 410 Enfield

    Well it looks promising.... Sides cut out and folded, the patterns were printed from the models above and stuck on with a glue stick then cut out with a jig saw, the guide plates were made in the...

    Liked On: 04-09-2018, 08:25 PM

12. 
    SixtyTen liked post by Chilli_Dog On thread : 410 Enfield

    Back to the fun of a magazine, a slight change of plan here (no not buying a Saiga one yet). The Enfield mag well is too narrow to fit a double stack and not rim lock. So instead of grinding out the...

    Liked On: 04-09-2018, 08:25 PM

13. 
    Cordite liked post by Chilli_Dog On thread : 410 Enfield

    And all the front end bits 93948

    Liked On: 27-08-2018, 10:17 PM

14. 
    Cordite liked post by Chilli_Dog On thread : 410 Enfield

    The plan had been to have a go at rust bluing all of the steel bits. Like most things this did not go to plan, possibly from my dubious acid solution but more likely form using our now nicely...

    Liked On: 27-08-2018, 10:16 PM

15. 
    300CALMAN liked post by Chilli_Dog On thread : 410 Enfield

    Little bit more, bit of wood with some carbon 89517 Then roughed out with an angle grinder, thats a legitimate wood work tool right? Actually a flap disc worked really well 89518 And...

    Liked On: 27-08-2018, 09:53 PM

Page 5 of 13 First 12345678910111213 Last

• Jump to page: