I've got some 7rem brass somewhere and some 180eld's and should have my load specs. I'll throw a dummy one together and give you a coal when I get home The powder did rattle so I knew I had plenty...
Liked On: 27-08-2019, 06:20 PM
Don't have coal. I load using a comparator so i was 10 thou off the lands based on ogive. It was in a blaser which have a long mag and action as they accommodate bigger cartridges. 30 inch barrel...
Liked On: 27-08-2019, 05:03 PM
7mm wsm could be another choice.... 162 eld doing 3005 (was going to go rem mag and then this came up)
Liked On: 27-08-2019, 04:43 PM
if you're planning on a custom build then definitely check out the 7mmBM option. Brass is no issue - Norma have it, and its way cheaper than Nosler28. As per post above from Gkp the 7mmBM will get...
Liked On: 27-08-2019, 03:37 PM
I had 2850fps from a 7mm rem mag. I didn't try for more speed but feel I was getting close. 2225,215fed, norma cases. Rifle had a long mag so could seat out with no compression. Was floating around...
Liked On: 27-08-2019, 02:33 PM
7mm blaser mag 180 eldm's at 3075. Will measure COAL and let you know
Liked On: 27-08-2019, 01:40 PM
So I've picked up a Martini Enfield .303 and just wondering if anyone can shed some light on the markings or maybe recommend somewhere I can look them up. Anyone else shoot/reload for these? Do...
Liked On: 27-08-2019, 11:11 AM
Just ask your local shop to get some off Beretta. Not too expensive from memory and will be the right bits without needing permits etc
Liked On: 25-08-2019, 11:57 AM
E117902......HENRY 45-70 Govt....shot it this morning,bugger all kick but she’s a noisy bitch...thinking of a red -dot,,......anyone using a red dot on something similar??????
Liked On: 16-08-2019, 10:33 AM
Acquired off another forum member, added the mounts/rings, period scope and front hood. Now just need the rear slide for the Williams sight 117265 117266 117267 117268 117269
Liked On: 14-08-2019, 05:48 PM
One I think kiwijames will appreciate. Left hand Sako 85 Hunter in .243win 117815 117816
Liked On: 14-08-2019, 05:48 PM
Hah! Even 'scope questions get political nowadays :) They are damned good 'scopes. 'Aint that enough?
Liked On: 12-08-2019, 08:51 PM
ChrisW all good mate. I do understand where you are coming from. years ago 500m was a long, long shot. if you wanted to get something out that far it was 7mm rem mags, maybe the odd 300 and I did...
Liked On: 12-08-2019, 05:31 PM
I think the .308 is a fantastic cartridge for reloading and I haven't bought a factory round for one since 1987. It'll do anything any other cartridge can do up to 300m and do it well. Add to that...
Liked On: 12-08-2019, 01:50 PM
117537
Liked On: 11-08-2019, 07:36 PM