Cooper
Member

72 Likes

Page 5 of 5 First 12345

• Jump to page:

1. 
   Cooper liked post by bully On thread : Introducing Larry

   The way I see it.... If you don't want it to run take out the front shoulder/leg I guess that's in line with tahr saying hit bone. Better to loose a front leg than a whole deer. This is the problem...

   Liked On: 23-02-2019, 09:06 AM

2. 
   Cooper liked post by Jaco Goosen On thread : Bad crown job?

   I've had a rifle with a crown cut like that and I should mention that it is to this day the most accurate rifle I've ever owned. If the rifles shoots good, keep it, otherwise have someone crown it...

   Liked On: 21-02-2019, 03:34 PM

3. 
   Cooper liked post by FRST On thread : Another carbon fibre stock

   Decided I needed another project the other day, and I'd bought a mauser fibreglass stock mould off a member here. Bought a Howa barrelled action (they can sell them new like that) stripped away the...

   Liked On: 18-02-2019, 09:22 AM

4. 
   Cooper liked post by Carlsen Highway On thread : How much does a 270Win suck in 2019?

   Hell no, waste of a good .270 when people shorten the barrel and put 'suppressors' on them. A .270 deserves a proper 24 inch barrel. 22 inches will do but not less that's for sure. This fad for...

   Liked On: 17-02-2019, 11:56 AM

5. 
   Cooper liked post by Nick-D On thread : How much does a 270Win suck in 2019?

   I think the main disadvantages with the 270 vs modern cartridges is the rifle manufacturers refusal to produce them with a decent bloody twist rate. For a 0-400m gun I would be going with the swede...

   Liked On: 14-02-2019, 04:51 PM

6. 
   Cooper liked post by GravelBen On thread : Best first firearm?

   I wouldn't recommend a semi-auto for a first firearm, better to learn good habits with a bolt action first.

   Liked On: 29-01-2019, 04:05 PM

7. 
   Cooper liked post by Double Shot On thread : Cerakote NZ

   I have had this rifle in bits for some time and had wondered what to do.... I came up with a plan when I decided to try out the Midnight Bronze (fantastic colour I might add) I accented it with...

   Liked On: 16-01-2019, 12:20 PM

8. 
   Cooper liked post by stug On thread : 7mm Rem Mag Reloading troubles...

   71.5 -72gr 2217 and a 162gr projectile is usually a great load in 7mm mags. It was what I used in mine, but I was able to seat further out due to mag length. The other thing to try is a two load...

   Liked On: 15-01-2019, 10:19 PM

9. 
   Cooper liked post by Flyblown On thread : Subsonic 308 project

   Cooper I assume it is a .308? If so, then sounds like the 1:11” twist is not fast enough to stabilise the longer 200gr bullet. shooternz’s 151gr bullets are specifically designed for .308.

   Liked On: 10-01-2019, 11:11 PM

10. 
    Cooper liked post by Cordite On thread : Subsonic 308 project

    ...and don't use fillers with Trail Boss as it's not position sensitive. Does not have to be stuffed back up against the primer hole.

    Liked On: 10-01-2019, 11:11 PM

11. 
    Cooper liked post by shooternz On thread : Subsonic 308 project

    Stop drilling out flash holes and there is no need for Magnum primers you are not tried to ignite coal, If standard primers will ignite 46.00 grains of 2206H why won't they work with Trail Boss...

    Liked On: 10-01-2019, 11:11 PM

12. 
    Cooper liked post by FRST On thread : 6.5 Grendel Howa project

    Went for a short wander with my boys this morning and Hunter shot this young billy. Only 100yrds away but the ELDM did it’s job punching through the chest diagonally and leaving a 50mm exit. Billy...

    Liked On: 27-11-2018, 10:24 PM

Page 5 of 5 First 12345

• Jump to page: