Cordite
Member

4634 Likes

Page 203 of 309 First ... 103153189190191192193194195196197198199200201202203204205206207208209210211212213214215216217253303 ... Last

• Jump to page:

1. 
   Cordite liked post by Carlsen Highway On thread : Anyone played with .30-30 subs?

   I load black powder cartridges without sizing the necks at all. If you chamber a fired case, and slip fit the bullet in then you are good. If you can chamber the rounds your good. The size of your...

   Liked On: 22-02-2019, 10:58 PM

2. 
   Cordite liked post by shooternz On thread : Anyone played with .30-30 subs?

   As long as the rounds chamber freely you are ok, cases spring back a few thou after firing if they didn't they would stick in the chamber, The problem with sizing dies is that they size the necks...

   Liked On: 22-02-2019, 10:58 PM

3. 
   Cordite liked post by Jaco Goosen On thread : Bad crown job?

   I've had a rifle with a crown cut like that and I should mention that it is to this day the most accurate rifle I've ever owned. If the rifles shoots good, keep it, otherwise have someone crown it...

   Liked On: 21-02-2019, 04:00 PM

4. 
   Cordite liked post by jakewire On thread : New Knife

   terryf . Get an address and send the knife to him please. pm me a bank account number Camgibbler, get a new cousin

   Liked On: 20-02-2019, 09:05 AM

5. 
   Cordite liked post by terryf On thread : New Knife

   I made the offer once before so I'll make it again to Camgibbler I have an M390 Custom hunting knife I'll let you have for $100 plus a Nitecore HC65 for $100 The knifes RRP is $300 and the...

   Liked On: 20-02-2019, 09:04 AM

6. 
   Cordite liked post by Micky Duck On thread : New Knife

   bacho.....cheap as chips,sharp as a razor,will do the job very nicely.sheath wont let you down inside your pack if you sit on it. mercator folder in pocket as back up.job done.

   Liked On: 20-02-2019, 09:04 AM

7. 
   Cordite liked post by dannyb On thread : New Knife

   Mercator folder about $50 carbon steel razor sharp, always goes with me no matter what, I have some fancier knives but the mercator will do everything I need. The pretty knives are just a magpie...

   Liked On: 20-02-2019, 09:03 AM

8. 
   Cordite liked post by kawhia On thread : Growth on spleen

   9/10 years old is not a young dog despite his energy levels, all our old fellas are pretty much the same here missing too many teeth but happy to mix it up with the young ones, he’s had a good life...

   Liked On: 19-02-2019, 05:39 PM

9. 
   Cordite liked post by cameronjackwhite On thread : Props to gunworks

   I dont really know where to post this so this will do. A couple of weeks ago I sent the 284 down to gunworks as the blueing was looking a bit crap, they suggested if I was inclined I flute the barrel...

   Liked On: 16-02-2019, 10:44 AM

10. 
    Cordite liked post by KiwiinSeattle On thread : Props to gunworks

    In the business world their suggestion of fluting is called "up selling" and they have really done a nice job with your rifle. Good choice.

    Liked On: 16-02-2019, 10:43 AM

11. 
    Cordite liked post by On thread : Search function and editing posts

    the search function has never worked for me

    Liked On: 16-02-2019, 10:17 AM

12. 
    Cordite liked post by Pommy On thread : got some range time with the 8mm and 7.62x39

    Cordite. Depends how ridiculously you want to compress it :XD: 202 LYM LRN GC 311299 (205gr), seated 0.310" deep for an OAL of 2.363", out of an imaginary super long throated 24" barrel... 33gr of...

    Liked On: 13-02-2019, 08:25 AM

13. 
    Cordite liked post by Micky Duck On thread : got some range time with the 8mm and 7.62x39

    from memory I get about 26grns of 2206 and its full...would be plurry near impossible to overload it with that powder...I use the 151 grn casts in mine with good results terminally...dont ask for...

    Liked On: 12-02-2019, 07:58 PM

14. 
    Cordite liked post by Pommy On thread : got some range time with the 8mm and 7.62x39

    I was reading somewhere (not sure if it was here?) that the Soviets made their 7.62x39 barrels using the same tooling as they made their Mosin / PK barrels with - with 54r needing a fast twist rate...

    Liked On: 12-02-2019, 07:23 PM

15. 
    Cordite liked post by matto1234 On thread : Dont take hearing protection lightly

    I made a big mistake on sunday, i took the pup out to get him used to firearms. I fired the 22 about 20 times moved up to the 223 and fired around 10 shots which didnt bother the pup, he was happy as...

    Liked On: 12-02-2019, 12:31 PM

Page 203 of 309 First ... 103153189190191192193194195196197198199200201202203204205206207208209210211212213214215216217253303 ... Last

• Jump to page: