Cordite
Member

2182 Likes

Page 1 of 146 12345678910111213141551101 ... Last

• Jump to page:

1. 
   Dan88 liked post by Cordite On thread : Brass on bolt face

   Clean face and claw with steel wool, then treat the same area with a small 1" square piece of 1000grit paper as you watch the news. This won't go through the case hardening, but you'll get a shiny...

   Liked On: 26-11-2024, 08:22 PM

2. 
   goatcommander liked post by Cordite On thread : Stalking with a .303

   Peter Paul Mauser should have stuck with cock-on-close. So many begin well but lose their way...

   Liked On: 25-11-2024, 10:58 PM

3. 
   Marty Henry liked post by Cordite On thread : Stalking with a .303

   Peter Paul Mauser should have stuck with cock-on-close. So many begin well but lose their way...

   Liked On: 23-11-2024, 06:17 PM

4. 
   Finnwolf liked post by Cordite On thread : Stalking with a .303

   The demos shown you were done with the bolt handle down. Lift the .303 bolt handle and the firing pin is not able to touch the primer. Thats what the grooves on the rear underside of the bolt body...

   Liked On: 23-11-2024, 12:54 PM

5. 
   Trout liked post by Cordite On thread : Stalking with a .303

   Chamber the round, bolt forwards and halfway back, and you have the round held nicely by the extractor claw. Unlikely to lose it. Consider removing the magazine, it's clacky noisy (and if you are...

   Liked On: 22-11-2024, 07:24 AM

6. 
   veitnamcam liked post by Cordite On thread : 303 Query

   ....but 2400fps is nicer, and it's not as if .303 cases are made of gold. You should be able to load to that velocity without abusing cases by using a slow powder, etc. But if you shoot cast lead ...

   Liked On: 17-11-2024, 05:32 PM

7. 
   veitnamcam liked post by Cordite On thread : 303 Query

   Check the case works in each rifle if you shoot more than one .303 rifle.

   Liked On: 17-11-2024, 05:32 PM

8. 
   Micky Duck liked post by Cordite On thread : 303 Query

   Check the case works in each rifle if you shoot more than one .303 rifle.

   Liked On: 17-11-2024, 04:10 PM

9. 
   kristopher liked post by Cordite On thread : Alternative to gas checks

   Tar paper wads they are. Not quite the same application though. Mk VII bullets were exposed lead bottom at the centre, so the disc just took care of shielding that. But it did not need to...

   Liked On: 10-11-2024, 06:20 AM

10. 
    thejamesjames liked post by Cordite On thread : Gun city opening in Palmerston North

    I understand GC may have stiff competition from the local cop shop, especially on ANZAC Days.

    Liked On: 04-11-2024, 11:53 AM

11. 
    rugerman liked post by Cordite On thread : Question: Scalpel Knife options

    AliExpress I've not bothered buying one myself, but it will be worth the tenner, at least. 261974

    Liked On: 31-10-2024, 08:00 AM

12. 
    30.06king liked post by Cordite On thread : Question: Scalpel Knife options

    AliExpress I've not bothered buying one myself, but it will be worth the tenner, at least. 261974

    Liked On: 28-10-2024, 05:36 PM

13. 
    Pengy liked post by Cordite On thread : A thread to check the trustworthiness of members?

    That FAL holders are certified "Fit and Proper" carries weight. No offense but I think the problem Lazyafpanda, is that you are a relative newcomer and so you don't have the advantage of knowing...

    Liked On: 22-10-2024, 08:59 PM

14. 
    Eat Meater liked post by Cordite On thread : Poodles as a deer dog

    Poodles actually look good without the humiliating pompom powder poofter haircuts. 106557 A travesty to do that to an intelligent creature - especially to one which has been bred for the...

    Liked On: 22-10-2024, 07:26 PM

15. 
    Scouser liked post by Cordite On thread : A thread to check the trustworthiness of members?

    That FAL holders are certified "Fit and Proper" carries weight. No offense but I think the problem Lazyafpanda, is that you are a relative newcomer and so you don't have the advantage of knowing...

    Liked On: 22-10-2024, 04:14 PM

Page 1 of 146 12345678910111213141551101 ... Last

• Jump to page: