csmiffy
Member

3213 Likes

Page 134 of 215 First ... 3484120121122123124125126127128129130131132133134135136137138139140141142143144145146147148184 ... Last

• Jump to page:

1. 
   csmiffy liked post by Beetroot On thread : .17 WSM thoughts?

   Factory ammo is cheaper and don't have to worry about reloading. It wont be as loud and will recoil less. Rifles can be smaller and lighter than a 223 sized rifle. 223 is far more versatile in...

   Liked On: 25-03-2020, 05:15 PM

2. 
   csmiffy liked post by gundoc On thread : BLR Questions:

   The problem with the BLR trigger is the totally weird hammer/sear relationship (clearly designed by a graduate engineer and not a gunsmith). Without some experience it is very easy to change this...

   Liked On: 25-03-2020, 01:03 PM

3. 
   csmiffy liked post by Micky Duck On thread : BLR Questions:

   STOP IT.......that combo is enough to make a bush hobbit have wet dreams........my 4x m8 went very very well on mine.

   Liked On: 25-03-2020, 09:20 AM

4. 
   csmiffy liked post by akaroa1 On thread : Self isolation gun projects

   csmiffy I have a huge gun screw selection and its pretty well organised I also have access to a colossal gun screw selection and will continue to have access to that source during the shut down ...

   Liked On: 24-03-2020, 04:22 PM

5. 
   csmiffy liked post by Tentman On thread : Self isolation gun projects

   Hmmm - here goes . . . - replace sear spring in Miroku 1885 "Low wall" single shot (everything on the web says its a fairly daunting task to reassemble) - make "AR ergonomic" stocks up for...

   Liked On: 24-03-2020, 09:21 AM

6. 
   csmiffy liked post by Finnwolf On thread : Self isolation gun projects

   If only it was so easy! New idler arm, brake hoses, rear brake shoes etc etc Still, like guns it’s a passion!:thumbsup:

   Liked On: 23-03-2020, 04:50 PM

7. 
   csmiffy liked post by gundoc On thread : Self isolation gun projects

   I am never short of gun projects but I will be spending the next few months completely repowering and modifying my '46 Chevy Fleetmaster (250HP modified 250 cubic inch inline 6, TH350 auto trans,...

   Liked On: 23-03-2020, 01:26 PM

8. 
   csmiffy liked post by Russian 22. On thread : Self isolation gun projects

   Was just sitting in the miscellaneous specials box next to the entrance.

   Liked On: 23-03-2020, 01:26 PM

9. 
   csmiffy liked post by ROKTOY On thread : Springs Junction 4WD, Camp, Bonfire trip

   Not at this stage. The committee may make a call to close it but I would doubt they will. Sent from my SM-G390Y using Tapatalk

   Liked On: 23-03-2020, 11:52 AM

10. 
    csmiffy liked post by gonetropo On thread : Self isolation gun projects

    i have to build a wiring loom for a mates truck. 53 chev pickup. motor is on order from the usa. 527 cubic inch with twin turbos. if it aint enough hp he wants nitrous installed. hate to think of...

    Liked On: 23-03-2020, 11:16 AM

11. 
    csmiffy liked post by mikee On thread : Federal TLR Projectiles - 30Cal

    I didnt think the price was to bad really @ about $1.60 ish each if they hold together like partitions but better bc. Given what we spend on all the other stuff we carry hunting. I don't see them as...

    Liked On: 23-03-2020, 10:29 AM

12. 
    csmiffy liked post by grandpamac On thread : Self isolation gun projects

    Greetings All, Projects. Where do I start? My scoped Martini has a Weaver No 60 base fitted to the barrel which leaves the scope too far forward for all but an old Leupold 4 power. A rail type base...

    Liked On: 23-03-2020, 10:22 AM

13. 
    csmiffy liked post by Russian 22. On thread : Self isolation gun projects

    Gun city auckland had some brass an sloaded rounds of 25/303

    Liked On: 23-03-2020, 10:21 AM

14. 
    csmiffy liked post by Scout On thread : lee speed copy

    I think the express sighted barreled action would of been in its youth one of these ? http://i.imgur.com/wpkOrtVh.jpg (https://imgur.com/wpkOrtV) http://i.imgur.com/nyOi2a7h.jpg...

    Liked On: 23-03-2020, 07:14 AM

15. 
    csmiffy liked post by Dicko On thread : lee speed copy

    csmiffy, Lee Speeds were made on both the Lee Metford and Enfield actions. They were produced in many variants of metal work and stock work. Some quite plain and others ornate, engraved and with...

    Liked On: 22-03-2020, 04:20 PM

Page 134 of 215 First ... 3484120121122123124125126127128129130131132133134135136137138139140141142143144145146147148184 ... Last

• Jump to page: