The process carrie's on. Funny story, took the presses steel floorplate from the recent 8x57 acquisition and tried it in the parker hale. Yeah nah. The bullet rubbing didnt change but the last...
Liked On: 23-01-2022, 07:44 PM
Old Sledgehammer would be proud.
Liked On: 20-01-2022, 08:36 PM
Old Sledgehammer would be proud.
Liked On: 20-01-2022, 07:40 PM
Instead of removing metal I am also going to try a thin metal packer glued in the front of the mag box as long as the cartridge length is ok. Then I don't have to remove any from the feed ramp FRST...
Liked On: 19-01-2022, 07:24 AM
Instead of removing metal I am also going to try a thin metal packer glued in the front of the mag box as long as the cartridge length is ok. Then I don't have to remove any from the feed ramp FRST...
Liked On: 18-01-2022, 09:57 PM
see below, Blued follower is mine, silver one is from mates 3006 that was a 308. Mine is a bit springier If you look closely you can see where the projectile is touching the side of the action,...
Liked On: 16-01-2022, 11:04 PM
see below, Blued follower is mine, silver one is from mates 3006 that was a 308. Mine is a bit springier If you look closely you can see where the projectile is touching the side of the action,...
Liked On: 16-01-2022, 08:24 PM
Not a fan of the colour but good result none the less
Liked On: 16-01-2022, 05:22 PM
akaroa1 see pic attached although I'd day it would be awfully close to a P14/P17 spring which may just work as well with minor tweaking 187961
Liked On: 15-01-2022, 10:34 PM
Dont stress about it. Only had the buggered rifle for close to 18 years and been dicking around for the last couple getting it to where it is now lol
Liked On: 15-01-2022, 10:32 PM
I sort of like the black series in principle but an old school 70s 3030 or 444 would be more better
Liked On: 14-01-2022, 07:32 PM
Old style warne premier bases. Just over 36mm long, 6.5mm thick (obviously dependent on reciever heights),12.5mm wide and 11 at the dovetail. Tried texting you but teenagers pillaged group data so...
Liked On: 11-01-2022, 06:23 PM
Or fixing them gundoc. Was out at your old padawan Zacs work the other day and talking about shit like that Anyone can do good work, but sometimes it is experience gained by mistakes and shitty...
Liked On: 08-01-2022, 06:29 PM
Wasnt lynx?
Liked On: 07-01-2022, 12:08 AM
Did fido from newcastle to mackay for a couple of years. Most of the time on site we were shade or aircon. occasionally we had to do maintenance in pit under the sun. When doing this we were...
Liked On: 31-12-2021, 07:00 PM