Dan88
Member

351 Likes

Page 6 of 24 First 1234567891011121314151617181920 ... Last

• Jump to page:

1. 
   Dan88 liked post by Micky Duck On thread : Brass on bolt face

   What's amusing is you would have to try really hard to get two factory loads further apart in power,pressure,velocity. Highland/ppu is mild and the other is borderline hotrodded. Give bolt a clean...

   Liked On: 25-11-2024, 07:45 PM

2. 
   Dan88 liked post by NCGNSMITH On thread : Brass on bolt face

   Not uncommon on a fresh bluing job or parkerising ect More so if you hit them in the bead blast tank first Nothing to worry about Definitely not enough to change headspace Or firing pin...

   Liked On: 25-11-2024, 07:44 PM

3. 
   Dan88 liked post by dogmatix On thread : Brass on bolt face

   I assume the Hornady case is on the right, based on the PPU/Highland anneal mark. Bit of a bulge in the case side wall. 'Could be' pressure related and that might fit in with the brass on the bolt...

   Liked On: 24-11-2024, 08:47 PM

4. 
   Dan88 liked post by Fssprecision On thread : Old BSA sight replacement

   Had a challenging job on this week, making a missing sight element for an old 1920s BSA air gun. The smaller the parts the harder it gets, primarily the issue is not cutting it off the stock too...

   Liked On: 23-11-2024, 02:43 PM

5. 
   Dan88 liked post by 55six On thread : Worlds Most Affordable Thermal Scope

   We have landed a sample of the very compact Sytong LM02-25 for testing. This would have to be the most affordable thermal rifle scope on the market at $1599. It features a 25mm F1.0 256x192 12 micron...

   Liked On: 20-11-2024, 11:29 PM

6. 
   Dan88 liked post by Quicknock On thread : Otaki Forks Goats

   Definitely goats in there. Also the corner creek area over Ocean Beach is a good shout for goats.

   Liked On: 19-11-2024, 04:04 PM

7. 
   Dan88 liked post by Kiwimaverick On thread : Knife restoration

   I found a knife hidden away in a box of tools I inherited recently from a clean out my grandfather had. Upon further inspection (it was quite rusty, forgot to get proper before photos, oops) it...

   Liked On: 18-11-2024, 10:28 PM

8. 
   Dan88 liked post by akaroa1 On thread : Stock duplicator. Who's got one ?

   Currently duplicating one by digital eye ometer 262866 262867

   Liked On: 09-11-2024, 10:44 PM

9. 
   Dan88 liked post by HILLBILLYHUNTERS On thread : Tararua ranges hunting

   Join your local Deerstalkers As . Generations of knowledge and experience , with hunts as well .

   Liked On: 09-11-2024, 10:39 PM

10. 
    Dan88 liked post by akaroa1 On thread : Stock duplicator. Who's got one ?

    I'm a Commercial Joiner by trade, licensed builder and precision engineer. I'm pretty confident if I could find a half decent duplicator I could get reasonable results from it And yes I could...

    Liked On: 07-11-2024, 09:54 PM

11. 
    Dan88 liked post by Lucky On thread : Forest Giants

    Hard case how this thread has gone from beautiful big living trees to beautiful big dead trees ...hahaha , be good to get some more pics on here of both though

    Liked On: 04-11-2024, 12:47 PM

12. 
    Dan88 liked post by 308 On thread : Forest Giants

    If you're in Wgtn and want to show your kids an old-ish tree there is an 800 year old Rimu in Wilton's Bush The viewing platform has gone in since I was last there It's about a 40 min round trip...

    Liked On: 04-11-2024, 12:45 PM

13. 
    Dan88 liked post by stagstalker On thread : Hunting with my full team

    The kids have been at me for some time to take them hunting again. I’ve done bugger all hunting myself this year due to a crazy work schedule and spending a bit more time on my dirtbike. This was...

    Liked On: 04-11-2024, 12:44 PM

14. 
    Dan88 liked post by Tentman On thread : Mauser Oberndorf Original sporting rifle parts

    So after some time and due to the excellent folk on here Lucky and Bundook I now have a bolt (the correct intermediate "sporter bolt" unfortunately with an altered bolt handle but restoarble) and a...

    Liked On: 04-11-2024, 12:42 PM

15. 
    Dan88 liked post by NO4 On thread : Stock duplicator. Who's got one ?

    Not hard to make one from what I've researched, acquiring decent wood to make the stocks from would be the expensive part

    Liked On: 01-11-2024, 10:34 PM

Page 6 of 24 First 1234567891011121314151617181920 ... Last

• Jump to page: