dannyb
Unapologetic gun slut

13290 Likes

Page 311 of 886 First ... 211261297298299300301302303304305306307308309310311312313314315316317318319320321322323324325361411811 ... Last

• Jump to page:

1. 
   dannyb liked post by Jaco Goosen On thread : new barrel - hard to eject rounds

   alphaDelta, answering a question you asked earlier. What can you expect after having a barrel replaced. The short answer: you can expect whatever you specified/negotiated before the build started....

   Liked On: 25-04-2022, 02:41 PM

2. 
   dannyb liked post by bigbear On thread : Putties

   If you can hang on the bush buck ones when on sale for $35 are good value for the money

   Liked On: 25-04-2022, 01:16 PM

3. 
   dannyb liked post by Hg1990 On thread : Frustrating arvo at the range. Powder charges.

   Have used the EC method and gotten consistently great results. As others mentioned it makes a lot of sense, the one thing I’d say is you have to be extremely OCD about charge weight. Like single...

   Liked On: 24-04-2022, 06:46 PM

4. 
   dannyb liked post by Tentman On thread : looking for-30cal 178eld-x and 300wsm brass hornady

   I have 80 or so 178's in eldx that you can have for $70 posted. Cheers

   Liked On: 24-04-2022, 02:25 PM

5. 
   dannyb liked post by Micky Duck On thread : Hi Tech Composites stocks on Howa 1500

   with arms like average bull gorrilla its no wonder some folks find L O P a tad short!!!!!! 2 weeks bud,2 more weeks.

   Liked On: 24-04-2022, 02:02 PM

6. 
   dannyb liked post by Stocky On thread : MTNGear bipod

   Tbh I don't see it. If anything I thought Backlanz always seem pretty defensive over anything he posts. If anyone had met him in person you would fins he's justa typical engineer/problems solver...

   Liked On: 24-04-2022, 01:24 PM

7. 
   dannyb liked post by Ryan_Songhurst On thread : Pack Weight

   Don’t weigh your stuff, thin it out and think about what’s important and what’s not but I’ve been down that track of weighing stuff and you just end up making dumb decisions on what’s good and what’s...

   Liked On: 24-04-2022, 12:38 PM

8. 
   dannyb liked post by RUMPY On thread : Dinner thread?

   Todays lunch Broccoli, bacon and roasted orange kumara salad with red backsteak. 195190

   Liked On: 24-04-2022, 10:44 AM

9. 
   dannyb liked post by VXN222 On thread : Re-barreling an old Tikka M76

   Gidday folks, After receiving the barrel and arrange a bit of a mission with my local gun smith, pleased to report the old war horse is Rutt ready and geared up for a couple of hunts shortly. ...

   Liked On: 24-04-2022, 09:42 AM

10. 
    dannyb liked post by Sideshow On thread : Pack Weight

    I found it help when that large rock was taken out:O_O::omg::XD: wont forget that walk in a hurry lol

    Liked On: 24-04-2022, 08:57 AM

11. 
    dannyb liked post by caberslash On thread : Hi Tech Composites stocks on Howa 1500

    Interested to see how these carbon stocks (the NZ High Tech and the Howa factory offering) compare to the Banser (confusingly, also called Hi Tech at one time!) which came on the Howa Alpine. Have...

    Liked On: 24-04-2022, 06:07 AM

12. 
    dannyb liked post by Tentman On thread : Frustrating arvo at the range. Powder charges.

    Thanks for that, its the simplest and best explanation of the EC approach I've seen...

    Liked On: 24-04-2022, 05:59 AM

13. 
    dannyb liked post by gqhoon On thread : Frustrating arvo at the range. Powder charges.

    Respectfully, you haven’t followed Cortina’s method, so you shouldnt be surprised that you’re getting different results. Starting again, load from 22.0 to 24.0gr in 0.2gr increments. Only 1 round...

    Liked On: 23-04-2022, 10:31 PM

14. 
    dannyb liked post by Tribrit On thread : Frustrating arvo at the range. Powder charges.

    One thing Cortina mentions constantly is how people struggle when the margin for error is beyond the accuracy of their equipment. Iv been watching Cortina and Keith Glasscock for ages, notice they...

    Liked On: 23-04-2022, 09:13 PM

15. 
    dannyb liked post by mikee On thread : new barrel - hard to eject rounds

    Definitely this

    Liked On: 23-04-2022, 08:40 PM

Page 311 of 886 First ... 211261297298299300301302303304305306307308309310311312313314315316317318319320321322323324325361411811 ... Last

• Jump to page: