187559 Just for u james
Liked On: 13-03-2022, 07:31 PM
"this thread is useless without photos" emoji.....
Liked On: 13-03-2022, 07:31 PM
Greetings, That is a pretty wimpy load, about 3 grains under max by my estimate. I note that the drop works out by estimate so it is possibly not a chrono error but I wouldn't rule it out. I would...
Liked On: 13-03-2022, 03:30 PM
What sort of chrony was used?
Liked On: 13-03-2022, 03:29 PM
you have 136 ftps extreme spread....what is the issue???? unless your shooting for gnats nuts at 600 yards you do not have an issue. do they group ok??? yes= no problem ducking as dannyb reaches...
Liked On: 13-03-2022, 03:29 PM
I was watching one of Mark and Sam 4 AW youtube vids and he was explaining his reloading system. I was surprised when he demonstrated how he lubed his brass before sizing. He just gave lots of 5...
Liked On: 13-03-2022, 03:25 PM
That is the important bit. For example, there is no point sighting in a rifle using front and rear bags if you will be shooting off a bipod when hunting because the point of impact might be quite...
Liked On: 13-03-2022, 01:27 PM
Treatments have come a long way if I can reduce the amount of medication she has to take we on a win
Liked On: 13-03-2022, 12:51 PM
This is pretty much my thoughts but Id add consistent neck tension which is aided hugely by good brass.
Liked On: 13-03-2022, 12:45 PM
I have about 15lt of 50% peroxide if you need some for bleaching.
Liked On: 13-03-2022, 03:09 AM
best goose load ever in the 12 gauge falcon/h&f 2 3/4 inch 40 gram lead twos crushes geese at all ranges thru the appropriate chokes
Liked On: 12-03-2022, 11:20 PM
steel 2,s in the 2 3/4 inch cases is my only worry but ive got a dozen left and ive yet to throw that much steel at geese or swans for ages. and the padocks we hunt tomorrow is with farmers...
Liked On: 12-03-2022, 11:13 PM
I shoot paper (and skeets at 200m-400m) to "de-stress from work" ...I find the focus needed to shoot well, tends to push everything else to the back of my mind for a while. Not with a 300 nm mind...
Liked On: 12-03-2022, 11:08 PM
Agree with grandpamac.. primers will tell you state of brass. I can anneal them for you which will probably help but won't restore stretched primer pockets (before you size and prime!). I'd do a...
Liked On: 12-03-2022, 10:50 PM
Fired up the braai and cooked beef fried rice tonight. 192229 192233 192230 192231
Liked On: 12-03-2022, 10:35 PM