you know me to well
Liked On: 06-10-2020, 04:55 PM
A rear view mirror might be useful for deer sneaking up behind you?
Liked On: 06-10-2020, 03:52 PM
So those scopes are going on a 7mm-08?
Liked On: 06-10-2020, 03:52 PM
i thought it was a make up mirror
Liked On: 06-10-2020, 03:36 PM
Just a note on the above, #69: threaded "modified" cases are for the OAL gauge, a measurement that M. Cortina is at pains to emphasize is not required for his method. The stock photo I posted is...
Liked On: 06-10-2020, 03:27 PM
RCBS make a calibre specific seating guage. Bos had a .270 win one for sale here recently. The hornady system above is more flexible if you shoot multiple calibres and you can thread your own cases...
Liked On: 06-10-2020, 02:57 PM
Even with a micrometer die adjustment you still have to deal with the contact point of the seating stem being some way up the ogive from where the bullet will make contact with the rifling, and the...
Liked On: 06-10-2020, 02:41 PM
No, that is incorrect. For the purposes of getting started with load testing, 'jam' is the point beyond which a projectile will stick in the rifling and stay behind if a loaded round is removed from...
Liked On: 06-10-2020, 12:45 PM
You'd need to be careful, could set the bush alight too.
Liked On: 06-10-2020, 01:49 AM
150715
Liked On: 06-10-2020, 01:48 AM
I treated the wife to a special date night last night. Dropped the kids off to my parents and off we went! We were banging away for two whole hours! She absolutely loved it! She nailed...
Liked On: 06-10-2020, 01:48 AM
If you're not keen on altering the bayonet, adding a couple of neodymium magnets seems to increase the magnetic fields enough that it picks up the projectile passing through. Tried it yesterday and...
Liked On: 05-10-2020, 02:12 PM
Not alignment but I used to check the strap tightness on mine for the first 3 or 4 shots. This after having mine come loose after maybe 10 shots. At least it drooped down and wasn't at risk of a hit.
Liked On: 04-10-2020, 07:00 PM
My Sika is back and takes pride of place on the wall. Steve Barclay did an excellent job, very happy with the end product. 150661 150662
Liked On: 04-10-2020, 02:09 PM
I've always full length sized so your ^ results are good news!
Liked On: 04-10-2020, 12:35 PM