dogmatix
Member

1690 Likes

Page 93 of 113 First ... 43798081828384858687888990919293949596979899100101102103104105106107 ... Last

• Jump to page:

1. 
   dogmatix liked post by Beavis On thread : 75gr A max - Hunting

   I think the 77gr TMK is designed to run in AR mags. Believe the advertised G1 is similar to the A max. I'm running a Marlin X7 of all things. It has a long mag and a super short throat so I can...

   Liked On: 27-01-2016, 02:13 PM

2. 
   dogmatix liked post by 300MAG On thread : Fitted my new prototype carbonfiber stock

   Just finished fitting the new ultralight weight carbonfibre stock to my Tikka T3 6.5x284 Stock weight 604gms with a alloy v-bock (the v-block eliminates any need to bed the action, any T3...

   Liked On: 26-01-2016, 07:34 PM

3. 
   dogmatix liked post by Simon On thread : Stag 9T 9mm

   Put the first shots through my Stag 9T tonight. I should have taken more ammo. 150 rounds did not last long at all. Dam fun to shoot. Will take 500 rounds next time. Sighted it in at 50m then...

   Liked On: 25-01-2016, 10:27 PM

4. 
   dogmatix liked post by 7mmsaum On thread : Really simple rifle cleaning?

   Gun slick foaming bore cleaner Have a read up on it, it works very well, no fuss and extremely easy to use. http://uploads.tapatalk-cdn.com/20160124/4df7219c59f8f75d36821fde6757ed26.jpg

   Liked On: 25-01-2016, 09:44 AM

5. 
   dogmatix liked post by Skitsokiwi On thread : 6.5 Creedmoor

   Finally got to the range to do some load development today. About 2720fps at 41.5gr with no pressure signs. Will go a bit further and see how far we can push it but am pretty happy with the...

   Liked On: 24-01-2016, 11:06 PM

6. 
   dogmatix liked post by res On thread : ASRA Carbineers shoot 24 Feb Clevedon Range

   Sounds like you guys need to come down to WSRA's red star day one year

   Liked On: 23-01-2016, 07:41 PM

7. 
   dogmatix liked post by Maca49 On thread : Taupo NZDS range

   Went to the range this am and sighted in my new BRADS 17 HMR and my 17 Hornet with Macs Vortex scope on, both under 1" square at 100 metres. Looks like the old H&S rules will see changes on those...

   Liked On: 20-01-2016, 12:48 PM

8. 
   dogmatix liked post by Jaco Goosen On thread : Hi from sunny South Africa

   Hi Everyone As you can see, I'm from South Africa, been hunting and shooting most of my life. Grew up living next to the local gunsmith and were allowed to "help" and tinker around the shop since...

   Liked On: 19-01-2016, 10:27 AM

9. 
   dogmatix liked post by Rwt On thread : AR muzzle flash

   Yea this was shot with an iphone 6 as well, its cool watching your shoulder ripple in slow mo when shooting magnums.

   Liked On: 18-01-2016, 11:18 PM

10. 
    dogmatix liked post by Rwt On thread : AR muzzle flash

    Took the AR to the range today and tried a couple of shots without the suppressor - Turns out its a bit more of a flame thrower than I thought. 44769 44770

    Liked On: 18-01-2016, 03:31 PM

11. 
    dogmatix liked post by 7mmsaum On thread : Cheaper to run my 223....

    Buy a .223 and suppress it http://uploads.tapatalk-cdn.com/20160116/1b70f4c83e6ce5e8ae68601c01aaf4dd.jpg Download it if you want it uber quiet, Trailboss will even push projectiles...

    Liked On: 16-01-2016, 05:07 PM

12. 
    dogmatix liked post by P38 On thread : Annealing questions

    Ok here is a ebay list and a rough drawing of the dimension's i used to build my annealer. First the rough measurement's. Your's can differ and you can chop n change this sizes as you like. This...

    Liked On: 14-01-2016, 07:07 AM

13. 
    dogmatix liked post by P38 On thread : Annealing questions

    Yep That's what I thought. A good keen man like you would build one of these in an afternoon. I'll put up the link to the materials/parts list and cutting instructions Here's the link...

    Liked On: 14-01-2016, 07:07 AM

14. 
    dogmatix liked post by P38 On thread : Annealing questions

    R93 $2.4million usd :) Or slightly less if you supply all the parts. ;) Cheers Pete

    Liked On: 14-01-2016, 07:06 AM

15. 
    dogmatix liked post by res On thread : Annealing questions

    A small production run could be in order, to buy a factory one is about $600!

    Liked On: 14-01-2016, 07:06 AM

Page 93 of 113 First ... 43798081828384858687888990919293949596979899100101102103104105106107 ... Last

• Jump to page: