DPT
Member

1030 Likes

Page 5 of 69 First 1234567891011121314151617181955 ... Last

• Jump to page:

1. 
   Grasshoppa liked post by DPT On thread : DPT help

   For the best results, we recommend having the bush machined on a lathe. We've encountered numerous drilled bushes that were not perfectly concentric, including one recently that was approximately 1mm...

   Liked On: 20-12-2024, 09:58 AM

2. 
   25/08 IMP liked post by DPT On thread : DPT help

   For the best results, we recommend having the bush machined on a lathe. We've encountered numerous drilled bushes that were not perfectly concentric, including one recently that was approximately 1mm...

   Liked On: 20-12-2024, 09:37 AM

3. 
   Juicy liked post by DPT On thread : DPT help

   For the best results, we recommend having the bush machined on a lathe. We've encountered numerous drilled bushes that were not perfectly concentric, including one recently that was approximately 1mm...

   Liked On: 20-12-2024, 09:16 AM

4. 
   6mm08 liked post by DPT On thread : Changer after chopped barrel

   If it is an over barrel suppressor, try removing the rear bush and shooting it without the bush, if the bush was slightly touching one side of the barrel, it could cause accuracy issues. If that is...

   Liked On: 29-11-2024, 07:02 PM

5. 
   camenzie liked post by DPT On thread : Changer after chopped barrel

   If it is an over barrel suppressor, try removing the rear bush and shooting it without the bush, if the bush was slightly touching one side of the barrel, it could cause accuracy issues. If that is...

   Liked On: 26-11-2024, 07:13 PM

6. 
   Micky Duck liked post by DPT On thread : Changer after chopped barrel

   If it is an over barrel suppressor, try removing the rear bush and shooting it without the bush, if the bush was slightly touching one side of the barrel, it could cause accuracy issues. If that is...

   Liked On: 25-11-2024, 12:05 PM

7. 
   chainsaw liked post by DPT On thread : Changer after chopped barrel

   If it is an over barrel suppressor, try removing the rear bush and shooting it without the bush, if the bush was slightly touching one side of the barrel, it could cause accuracy issues. If that is...

   Liked On: 25-11-2024, 10:33 AM

8. 
   Coop liked post by DPT On thread : Gunsmith - triggering event or not?

   I believe you should be reading (a) to its full extent, note the “and” at the end. To me that says you need to fulfill (a) as well as (b) for that to apply. Subclause (1) does not apply to a...

   Liked On: 11-11-2024, 11:13 AM

9. 
   BSA liked post by DPT On thread : Gunsmith - triggering event or not?

   If we have your firearm for less than 30 days it is not an activating circumstance. You are not required to register your firearm.

   Liked On: 11-11-2024, 06:40 AM

10. 
    Finnwolf liked post by DPT On thread : Gunsmith - triggering event or not?

    Correct. With the exception of prohibited magazines. 262953 262954

    Liked On: 10-11-2024, 08:22 PM

11. 
    Finnwolf liked post by DPT On thread : Gunsmith - triggering event or not?

    The arms act does say “where practical” , see (e) bellow. 19B Conditions relating to storage of firearms in vehicles during transportation (1) Unless otherwise permitted by a member of the...

    Liked On: 10-11-2024, 06:37 PM

12. 
    No.3 liked post by DPT On thread : Gunsmith - triggering event or not?

    The arms act does say “where practical” , see (e) bellow. 19B Conditions relating to storage of firearms in vehicles during transportation (1) Unless otherwise permitted by a member of the...

    Liked On: 10-11-2024, 05:50 PM

13. 
    No.3 liked post by DPT On thread : Gunsmith - triggering event or not?

    If we have your firearm for less than 30 days it is not an activating circumstance. You are not required to register your firearm.

    Liked On: 10-11-2024, 05:50 PM

14. 
    No.3 liked post by DPT On thread : Gunsmith - triggering event or not?

    You are mistaken, there is an allowance in the arms act for temporary transfer. As long as we hand your firearm back with 30 days, you are not required to register it. 95 Obligation to provide...

    Liked On: 10-11-2024, 05:50 PM

15. 
    Husky1600#2 liked post by DPT On thread : Gunsmith - triggering event or not?

    The arms act does say “where practical” , see (e) bellow. 19B Conditions relating to storage of firearms in vehicles during transportation (1) Unless otherwise permitted by a member of the...

    Liked On: 10-11-2024, 05:31 PM

Page 5 of 69 First 1234567891011121314151617181955 ... Last

• Jump to page: