DPT
Member

1030 Likes

Page 65 of 69 First ... 1551525354555657585960616263646566676869 Last

• Jump to page:

1. 
   veitnamcam liked post by DPT On thread : Conflicting Muzzle Forward Can Advice

   Couple of points. As long as the threads on both barrel and suppressor match without too much clearance there wont be an issue, if there is a ton of play and the suppressor comes loose and drops...

   Liked On: 04-02-2015, 07:18 PM

2. 
   Kiwi Greg liked post by DPT On thread : Conflicting Muzzle Forward Can Advice

   Couple of points. As long as the threads on both barrel and suppressor match without too much clearance there wont be an issue, if there is a ton of play and the suppressor comes loose and drops...

   Liked On: 04-02-2015, 07:09 PM

3. 
   Kiwi Greg liked post by DPT On thread : The new cnc lathe has arrived.

   Nearly 6 months to get here, shes big and heavy, 8 tons, twin spindle multi axis lathe, took half the day to get it into the shop. Looking forward to getting it up and running, the last few months...

   Liked On: 04-02-2015, 06:59 PM

4. 
   Bryan liked post by DPT On thread : The new cnc lathe has arrived.

   Nearly 6 months to get here, shes big and heavy, 8 tons, twin spindle multi axis lathe, took half the day to get it into the shop. Looking forward to getting it up and running, the last few months...

   Liked On: 04-02-2015, 06:23 PM

5. 
   Toby liked post by DPT On thread : The new cnc lathe has arrived.

   Nearly 6 months to get here, shes big and heavy, 8 tons, twin spindle multi axis lathe, took half the day to get it into the shop. Looking forward to getting it up and running, the last few months...

   Liked On: 04-02-2015, 06:11 PM

6. 
   screamO liked post by DPT On thread : The new cnc lathe has arrived.

   Nearly 6 months to get here, shes big and heavy, 8 tons, twin spindle multi axis lathe, took half the day to get it into the shop. Looking forward to getting it up and running, the last few months...

   Liked On: 04-02-2015, 06:10 PM

7. 
   Scouser liked post by DPT On thread : Conflicting Muzzle Forward Can Advice

   Couple of points. As long as the threads on both barrel and suppressor match without too much clearance there wont be an issue, if there is a ton of play and the suppressor comes loose and drops...

   Liked On: 04-02-2015, 12:43 PM

8. 
   Tikka7mm08 liked post by DPT On thread : Conflicting Muzzle Forward Can Advice

   Couple of points. As long as the threads on both barrel and suppressor match without too much clearance there wont be an issue, if there is a ton of play and the suppressor comes loose and drops...

   Liked On: 04-02-2015, 11:13 AM

9. 
   ebf liked post by DPT On thread : .300 WinMag Break vs Suppressor

   Baffles worn out in 200 rounds is premature failure and will be replaced as long as the suppressor is cared for as per instructions, if someone is going to put 200 rounds out of a 300 win mag...

   Liked On: 18-01-2015, 06:54 AM

10. 
    mikee liked post by DPT On thread : .300 WinMag Break vs Suppressor

    Baffles worn out in 200 rounds is premature failure and will be replaced as long as the suppressor is cared for as per instructions, if someone is going to put 200 rounds out of a 300 win mag...

    Liked On: 17-01-2015, 02:15 PM

11. 
    veitnamcam liked post by DPT On thread : .300 WinMag Break vs Suppressor

    Baffles worn out in 200 rounds is premature failure and will be replaced as long as the suppressor is cared for as per instructions, if someone is going to put 200 rounds out of a 300 win mag...

    Liked On: 16-01-2015, 11:31 AM

12. 
    Kiwi Greg liked post by DPT On thread : .300 WinMag Break vs Suppressor

    Baffles worn out in 200 rounds is premature failure and will be replaced as long as the suppressor is cared for as per instructions, if someone is going to put 200 rounds out of a 300 win mag...

    Liked On: 16-01-2015, 08:31 AM

13. 
    7mmsaum liked post by DPT On thread : .300 WinMag Break vs Suppressor

    Baffles worn out in 200 rounds is premature failure and will be replaced as long as the suppressor is cared for as per instructions, if someone is going to put 200 rounds out of a 300 win mag...

    Liked On: 16-01-2015, 08:31 AM

14. 
    Toby liked post by DPT On thread : .300 WinMag Break vs Suppressor

    You have not heard of "many"? I havnt heard of any... :)

    Liked On: 15-01-2015, 09:37 PM

15. 
    kiwijames liked post by DPT On thread : .300 WinMag Break vs Suppressor

    You have not heard of "many"? I havnt heard of any... :)

    Liked On: 15-01-2015, 08:28 PM

Page 65 of 69 First ... 1551525354555657585960616263646566676869 Last

• Jump to page: