dvk-kp
Cole

190 Likes

Page 8 of 13 First 12345678910111213 Last

• Jump to page:

1. 
   dannyb liked post by dvk-kp On thread : mitsi swb

   If it says GDI on it then run far and run fast. I’ve had heaps of Pajero’s of different model and they are awesome. Missus currently has a 2008 Swb 3.8 v6. It’s awesome, goes well and all the mod...

   Liked On: 10-09-2022, 08:36 PM

2. 
   Hayden C liked post by dvk-kp On thread : Car headlight upgrades

   https://www.trademe.co.nz/trade-me-motors/car-parts-accessories/performance/bulbs/auction-3723827403.htm I just put a set of these in my 2003 hilux, made a big difference. Don’t get me wrong,...

   Liked On: 28-08-2022, 12:32 PM

3. 
   Moa Hunter liked post by dvk-kp On thread : New work rig setup and advice

   Have a look into an engine driven compressor for air. York ones have been used for a long time in airbagged mini trucks. The can supply a lot of air quickly, and you could have a tank for it to fill...

   Liked On: 14-07-2022, 05:06 PM

4. 
   veitnamcam liked post by dvk-kp On thread : New work rig setup and advice

   Have a look into an engine driven compressor for air. York ones have been used for a long time in airbagged mini trucks. The can supply a lot of air quickly, and you could have a tank for it to fill...

   Liked On: 14-07-2022, 03:17 PM

5. 
   XR500 liked post by dvk-kp On thread : New work rig setup and advice

   Have a look into an engine driven compressor for air. York ones have been used for a long time in airbagged mini trucks. The can supply a lot of air quickly, and you could have a tank for it to fill...

   Liked On: 14-07-2022, 03:05 PM

6. 
   Mintie liked post by dvk-kp On thread : New work rig setup and advice

   Have a look into an engine driven compressor for air. York ones have been used for a long time in airbagged mini trucks. The can supply a lot of air quickly, and you could have a tank for it to fill...

   Liked On: 14-07-2022, 12:23 PM

7. 
   gundoc liked post by dvk-kp On thread : NZAHAA Wellington auction

   My workmate went along expecting to spend 10k to get all the things he wanted, got everything plus a bit more for 6ish. He said people seemed to be holding on to their money at the moment. A Brno...

   Liked On: 09-05-2022, 10:28 PM

8. 
   223nut liked post by dvk-kp On thread : Knife / axe display

   I hang tools etc in my shed on a piece of 20mm MDF… screw it to the wall then drill 3/8 holes in it where ever needed and then tap in a 10mm piece of round bar or dowel and it’s mint. Save drilling...

   Liked On: 14-01-2022, 01:11 PM

9. 
   ando2506 liked post by dvk-kp On thread : Cleaning Stag head

   Also be careful if you use the waterblaster. My missus pointed it down the spinal cord hole into the skull and got covered in cooked brains, gees did I laugh!

   Liked On: 19-12-2021, 06:02 AM

10. 
    Maca49 liked post by dvk-kp On thread : Oldest active hunting rifle

    I shoot goats occasionally with my missus 1860 Snyder. It’s Good fun.

    Liked On: 11-11-2021, 07:09 PM

11. 
    Micky Duck liked post by dvk-kp On thread : Who has built a heavy duty cast bullet trap ?

    I reckon a heavy bit of plate on 45 degree angle and sand underneath so your shot gets directed down and the sand catches it rather then rely on the steel itself to stop the bullet. Then just rake...

    Liked On: 27-08-2021, 10:52 PM

12. 
    rugerman liked post by dvk-kp On thread : Who has built a heavy duty cast bullet trap ?

    I reckon a heavy bit of plate on 45 degree angle and sand underneath so your shot gets directed down and the sand catches it rather then rely on the steel itself to stop the bullet. Then just rake...

    Liked On: 27-08-2021, 02:33 PM

13. 
    akaroa1 liked post by dvk-kp On thread : Who has built a heavy duty cast bullet trap ?

    I reckon a heavy bit of plate on 45 degree angle and sand underneath so your shot gets directed down and the sand catches it rather then rely on the steel itself to stop the bullet. Then just rake...

    Liked On: 27-08-2021, 01:19 PM

14. 
    Moa Hunter liked post by dvk-kp On thread : Who has built a heavy duty cast bullet trap ?

    I reckon a heavy bit of plate on 45 degree angle and sand underneath so your shot gets directed down and the sand catches it rather then rely on the steel itself to stop the bullet. Then just rake...

    Liked On: 27-08-2021, 12:35 PM

15. 
    Micky Duck liked post by dvk-kp On thread : Ruger 10/22 Magnum

    I’ve got one. I like it cos it’s a bit unusual, great for goats. It Does catch the occasional spent shell in the action but doesn’t really worry me. Seems to like heavier bullets. If you find...

    Liked On: 15-08-2021, 09:46 PM

Page 8 of 13 First 12345678910111213 Last

• Jump to page: