eamars
Member

87 Likes

Page 2 of 6 First 123456 Last

• Jump to page:

1. 
   eamars liked post by Beavis On thread : Kriss DMK22 "True" barrel compatibility

   I used my barrel sleeve on a bog standard blued 10/22 Carbine barrel. It worked (well, the parts fit, the gun still didn't really work per se).

   Liked On: 28-05-2024, 12:01 AM

2. 
   eamars liked post by Fly-My-Pretties On thread : The OpenTrickler

   Very very cool!

   Liked On: 10-05-2024, 08:08 PM

3. 
   eamars liked post by STC On thread : Reloading software. What to use ?

   have GRT and quickload. prefer GRT by a large margin. The calculations I come up with usually end up within a few fps to actual measured velocities, (at least for the reloads I do) which I...

   Liked On: 08-05-2024, 09:46 PM

4. 
   eamars liked post by johnd On thread : The OpenTrickler

   Awesome idea

   Liked On: 08-05-2024, 09:45 PM

5. 
   eamars liked post by gimp On thread : The OpenTrickler

   Neato

   Liked On: 08-05-2024, 11:36 AM

6. 
   eamars liked post by Preacher On thread : Best solution to clean the fully sealed suppressor?

   Do it twice? 3000 rounds is a fair amount of shit built up

   Liked On: 08-04-2024, 05:44 PM

7. 
   eamars liked post by Bol Tackshin On thread : Best solution to clean the fully sealed suppressor?

   As Tiaan suggested. I had a sealed suppressor on an old 303 that suffered from this. Just pour a few tablespoons in (I used Hoppes no 9), plug both ends, leave it in a handy spot for a day and give...

   Liked On: 08-04-2024, 03:22 PM

8. 
   eamars liked post by Tangobravo On thread : Best solution to clean the fully sealed suppressor?

   If you have access to copious amounts of bore solvent, I’ve plugged my suppressor before and filled it up for a few hours and given it a good rinse out after. Worked well Sent from my iPhone...

   Liked On: 08-04-2024, 03:22 PM

9. 
   eamars liked post by grandpamac On thread : "Trueing" BC/Velocity

   Greetings eamars and all, That is exactly what I have done and found measured velocity at the target was very close to estimated, less than 10 fps. I did not measure the drop as I had done a rough...

   Liked On: 05-04-2024, 03:59 PM

10. 
    eamars liked post by Cyclops On thread : Long Range Hunting and F-Class Target Shooting.

    A list of NRANZ affiliated clubs can be found on the NRANZ website https://www.nranz.org.nz/associations-and-clubs/member-clubs/ It will be prone shooting (or benchrest) on most NRANZ certified...

    Liked On: 26-02-2024, 08:45 PM

11. 
    eamars liked post by PadLo On thread : Home Made AutoTrickler (OpenTrickler) Project

    Very cool, nice work.

    Liked On: 12-10-2021, 09:04 PM

12. 
    eamars liked post by johnd On thread : Home Made AutoTrickler (OpenTrickler) Project

    Well done!

    Liked On: 12-10-2021, 09:04 PM

13. 
    eamars liked post by 7mm Rem Mag On thread : Home Made AutoTrickler (OpenTrickler) Project

    Looks good

    Liked On: 12-10-2021, 09:04 PM

14. 
    eamars liked post by Jhon On thread : RCBS Summit - anyone with experience of using one?

    Here ya go. Some disclaimers first: I'm a practical reloader for average distance hunting. And pistol shooting. I don't have any expertise in the real fancy stuff like shoulder bumping, chasing the...

    Liked On: 10-10-2021, 02:54 PM

15. 
    eamars liked post by zimmer On thread : RCBS Summit - anyone with experience of using one?

    Good choice. I think you'll find the Co-ax will take over more than just sizing.

    Liked On: 07-10-2021, 02:37 PM

Page 2 of 6 First 123456 Last

• Jump to page: