Same here, though I only have four case types. I like the die locking nuts with a pointed grub screw going into the thread to lock it in place. Set the locking nut where needed and just spin the die...
Liked On: 20-07-2016, 09:32 PM
Takes me all of 12 seconds to wind a die in or out of my ancient RCBS press. Slightly longer if stopping to sip my coffee or to add a Skip's shim with the die. :P Currently load for myself and mate...
Liked On: 20-07-2016, 09:31 PM
Re the hornady / lee bushing systems. I bought a Redding Big Boss 11 and since it had the large thread capacity decided to go with the Hornady quick change system. For the extra out lay on bushings...
Liked On: 20-07-2016, 09:31 PM
VX 3 3.5 to 10 with premier mil dot reticule lots of fun out to 160 with subs
Liked On: 19-07-2016, 11:53 PM
It has to be something not right with either the press or bushings. They should just lock in hand tight and not move. I do check mine every now and then, but they are always solid. Give workshop...
Liked On: 19-07-2016, 11:27 PM
52213
Liked On: 18-07-2016, 08:41 PM
Legend.😆 Thanks Pete. Sent from my SM-G900F using Tapatalk
Liked On: 26-06-2016, 04:21 PM
Just back from Reddot Rifles... baked on GunKote. Fast turn around, nice guy to deal with, rang when arrived to double check what I wanted done, rang when she'd left via courier.... can't ask for...
Liked On: 19-05-2016, 12:13 AM
Not sure about any chrono that you strap to the barrel.... particularly when trying to do accuracy OCW load development...... not exactly best practice I would suggest...
Liked On: 13-05-2016, 11:41 AM
here are the notes I send out to guys starting with OCW:
Liked On: 13-05-2016, 11:41 AM
J.T.Salmon
Liked On: 22-04-2016, 01:12 PM
Great reports. Im living a vicarious roar this year so thank you[emoji106]
Liked On: 21-04-2016, 09:33 PM
Shot some Sika with the Amaxs at about 50m, doing 2950 at the muzzle. They all died.
Liked On: 15-02-2016, 08:45 PM
Here's some more drawings that you will need 445984459944600
Liked On: 04-02-2016, 02:46 PM
Ok here is a ebay list and a rough drawing of the dimension's i used to build my annealer. First the rough measurement's. Your's can differ and you can chop n change this sizes as you like. This...
Liked On: 04-02-2016, 02:45 PM