feratox
Member

101 Likes

Page 2 of 7 First 1234567 Last

• Jump to page:

1. 
   buell984 liked post by feratox On thread : X Bolt Triggers

   No problems. Wasn't even couriered. Just ordinary post. Only went that way as mcarbo don't seem to ship to nz

   Liked On: 17-11-2023, 11:02 AM

2. 
   buell984 liked post by feratox On thread : X Bolt Triggers

   I also bought a gunbloke spring (have an mcarbo spring in another xbolt). Haven't measured oull but feels good, possibly lighter than mcarbo . The sear spring was sideways from the factory so I...

   Liked On: 17-11-2023, 11:02 AM

3. 
   techno retard liked post by feratox On thread : Big gun safe advice

   I have a 16 gun fire proof job. Wish I had gone bigger. Unless they are all small opensight rifles or single barrel shotguns you can't fit anywhere near that number of firearms in there, let alone...

   Liked On: 10-11-2023, 05:22 PM

4. 
   11mms liked post by feratox On thread : Ruger 10/22 wont cycle

   If you're careful, try lapping the bolt to the raceways so its as smooth as it can get. Also "smoothing" or putting a gentle radius on the lower rear of the bolt to help it ride over the hammer...

   Liked On: 28-08-2023, 10:52 AM

5. 
   Micky Duck liked post by feratox On thread : .308 ammunition advice

   Have you tried without suppressor or with different muzzle device

   Liked On: 26-08-2023, 08:53 PM

6. 
   Williamfga liked post by feratox On thread : .308 ammunition advice

   Have you tried without suppressor or with different muzzle device

   Liked On: 26-08-2023, 02:20 PM

7. 
   Bill999 liked post by feratox On thread : Ruger 10/22 wont cycle

   If you're careful, try lapping the bolt to the raceways so its as smooth as it can get. Also "smoothing" or putting a gentle radius on the lower rear of the bolt to help it ride over the hammer...

   Liked On: 22-08-2023, 08:50 AM

8. 
   svt40 liked post by feratox On thread : Ruger 10/22 wont cycle

   If you're careful, try lapping the bolt to the raceways so its as smooth as it can get. Also "smoothing" or putting a gentle radius on the lower rear of the bolt to help it ride over the hammer...

   Liked On: 21-08-2023, 03:21 PM

9. 
   Barry the hunter liked post by feratox On thread : Bipod, uphill shooting issue.

   Possibly either torque on the stock (while trying to aim in an awkward position) twisting the action or causing the stock contact he barrel, or parallax issues fromm awkward positioning, I.e. not...

   Liked On: 08-08-2023, 07:18 PM

10. 
    RV1 liked post by feratox On thread : Best wood for making bows

    Osange orange if you can find it. Otherwise try find some old skis,use front half and shape them for limbs. Laminate some wood and something synthetic for a handle and bolt ski bits to it.

    Liked On: 08-06-2023, 03:42 PM

11. 
    Micky Duck liked post by feratox On thread : Best wood for making bows

    Osange orange if you can find it. Otherwise try find some old skis,use front half and shape them for limbs. Laminate some wood and something synthetic for a handle and bolt ski bits to it.

    Liked On: 07-06-2023, 06:27 PM

12. 
    Bol Tackshin liked post by feratox On thread : Downhill shot

    Should be drop for 260 but windage for 300

    Liked On: 04-04-2023, 05:57 PM

13. 
    Steverusty liked post by feratox On thread : Class ares 567 atz transmission problem

    From experience here (with a different flavour of tractor, not all in same tractor); the 3rd one seems most likely 1. had a front diff partially go in one, would go in 4wd but would "slip" when...

    Liked On: 07-02-2023, 09:02 AM

14. 
    Micky Duck liked post by feratox On thread : Class ares 567 atz transmission problem

    From experience here (with a different flavour of tractor, not all in same tractor); the 3rd one seems most likely 1. had a front diff partially go in one, would go in 4wd but would "slip" when...

    Liked On: 06-02-2023, 08:17 PM

15. 
    Micky Duck liked post by feratox On thread : Flod damaged cars?

    I bought a flood damaged European about 10 years ago and rebuilt it. Took quite a bit ordering bits and visiting the wreckers to get it sorted. Hardest part was finding someone to certify the repair....

    Liked On: 06-02-2023, 04:01 PM

Page 2 of 7 First 1234567 Last

• Jump to page: