flyingpillock
Member

10 Likes

1. 
   flyingpillock liked post by aplonsky On thread : Light weight tents

   I really enjoy the Tarptent Stratospire Li. When set up correctly it’s as bombproof a 3 season tent as one can ask for. I haven’t had a chance to test it in NZ (yet), but it’s held up very well in...

   Liked On: 22-01-2025, 04:13 AM

2. 
   flyingpillock liked post by Flyblown On thread : Warehouse ”Back Country” trousers

   I’ve been meaning to write a review of these trousers for a while. Some may well laugh and scoff at the title! I get that, we are not talking KUIU here. But bear with me. ...

   Liked On: 15-07-2023, 08:23 PM

3. 
   flyingpillock liked post by CooeeBay On thread : Anyone using the Vortex 1400 HD Rangefinder?

   Not used it personally, but since the model was upgraded to the HD lens, our sales in Au & NZ have been very popular. It is by far the biggest seller and never had a return because it did not live up...

   Liked On: 04-06-2023, 10:45 PM

4. 
   flyingpillock liked post by TimC On thread : Anyone using the Vortex 1400 HD Rangefinder?

   Yes I have used the crossfire model (cheapest) and its bloody exceptional for the money. I was ranging deer to 900m. It does it's job very well. Ranged and dialled animals to 570y with success and...

   Liked On: 04-06-2023, 10:45 PM

5. 
   flyingpillock liked post by 199p On thread : Anyone chrono a T3x in 6.6 Crd using Hornady 143 ELD-x

   my 18" is doing 2530

   Liked On: 02-06-2023, 04:53 PM

6. 
   flyingpillock liked post by 6.5 CRD On thread : Anyone chrono a T3x in 6.6 Crd using Hornady 143 ELD-x

   This should give you something to work with. Tested on Labradar 16" = 2375 18" = 2455 24" = 2590 Above speeds are an average across 3 shot groups with factory precision hunter ammo in 3...

   Liked On: 02-06-2023, 04:53 PM

7. 
   flyingpillock liked post by zeropak On thread : Anyone chrono a T3x in 6.6 Crd using Hornady 143 ELD-x

   2530 out of a 20" barrel T3x

   Liked On: 02-06-2023, 04:53 PM

8. 
   flyingpillock liked post by Huntn On thread : Anyone chrono a T3x in 6.6 Crd using Hornady 143 ELD-x

   2550 out of my boys 20'' barrel T3x. Our hand loads are doing 2730 with the 143's.

   Liked On: 02-06-2023, 04:53 PM

9. 
   flyingpillock liked post by No.3 On thread : Anyone chrono a T3x in 6.6 Crd using Hornady 143 ELD-x

   I saw the title for the thread, and thought to myself even the 6.5 crud guys themselves are trying to upsize their choices now haha If you don't have a chrono, you can confirm by measuring out an...

   Liked On: 02-06-2023, 04:53 PM

10. 
    flyingpillock liked post by stug On thread : Dry your tumbled brass thoroughly

    Sorry, just checked. They are Federal small pistol primers.

    Liked On: 13-09-2022, 11:04 PM