Friwi
Member

2594 Likes

Page 15 of 173 First 123456789101112131415161718192021222324252627282965115 ... Last

• Jump to page:

1. 
   Fssprecision liked post by Friwi On thread : Barrel threading

   I like barrels that have enough meat to do a 14x1 thread at least . But it does not always happen how I want. I once fitted a brake with 1/2-28 thread on a 300 win mag savage that the customers said...

   Liked On: 23-09-2024, 09:26 AM

2. 
   Micky Duck liked post by Friwi On thread : Super Slo mo 600000 frames per second projectiles leaving muzzle

   There might be more to it ( holding the fore end) than just that. Why don’t we see the muzzle or barrel vibration in those videos when we know very well that they do exist?

   Liked On: 21-09-2024, 12:11 PM

3. 
   Micky Duck liked post by Friwi On thread : Bush rifles

   Yet, it is kiwi reviving the concept and making probably one of the best reproduction currently available worldwide: ...

   Liked On: 19-09-2024, 08:43 PM

4. 
   Husky1600#2 liked post by Friwi On thread : Swarovski scope with swarovski rail mount on tikka

   Recknagel.com or .de will have the mount you are after

   Liked On: 16-09-2024, 09:24 PM

5. 
   Basenjiboy liked post by Friwi On thread : Ideas

   22-250 fast twist / long throat or 338 federal.

   Liked On: 15-09-2024, 06:58 PM

6. 
   Micky Duck liked post by Friwi On thread : Remington Alpha 1 ,who has seen one ,got one?

   Yes I had one in my hands. It is how a proper rifle should be built. The bolt with its 1/4 turn firing pin disassembly is an improvement . I don’t like how the for end tip finishes on the stock ,...

   Liked On: 14-09-2024, 02:23 PM

7. 
   Cowboy liked post by Friwi On thread : Auckland Gunsmith / BLR

   I take them regularly appart for threading barrels. And put them back together and retime them no problem. Call the office at Dpt during working hours if you want.

   Liked On: 13-09-2024, 10:22 PM

8. 
   ZQLewis liked post by Friwi On thread : Auckland Gunsmith / BLR

   I take them regularly appart for threading barrels. And put them back together and retime them no problem. Call the office at Dpt during working hours if you want.

   Liked On: 13-09-2024, 08:14 PM

9. 
   7mil08 liked post by Friwi On thread : 280AI Revisited - Forbes - Load Development

   One very simple way, ( found by an Australian I believe!), is revert your two pins so that actually the flats are facing each other’s , it will tell you straight away if there is a mis alignement and...

   Liked On: 13-09-2024, 07:02 PM

10. 
    Micky Duck liked post by Friwi On thread : Auckland Gunsmith / BLR

    I take them regularly appart for threading barrels. And put them back together and retime them no problem. Call the office at Dpt during working hours if you want.

    Liked On: 13-09-2024, 11:20 AM

11. 
    csmiffy liked post by Friwi On thread : Auckland Gunsmith / BLR

    I take them regularly appart for threading barrels. And put them back together and retime them no problem. Call the office at Dpt during working hours if you want.

    Liked On: 13-09-2024, 10:26 AM

12. 
    tetawa liked post by Friwi On thread : Auckland Gunsmith / BLR

    I take them regularly appart for threading barrels. And put them back together and retime them no problem. Call the office at Dpt during working hours if you want.

    Liked On: 13-09-2024, 07:05 AM

13. 
    Shearer liked post by Friwi On thread : Fast(er) twist 22-250. Anyone using one??

    Andy animal is Into the fast twist 22-250 tikka stuff.

    Liked On: 07-09-2024, 09:08 PM

14. 
    TakaRat liked post by Friwi On thread : A Good Effort: Kaimai Hunt

    Thomson track tops or wairere falls ?

    Liked On: 06-09-2024, 09:07 PM

15. 
    Micky Duck liked post by Friwi On thread : Twist Rate:Projectile Weight

    I don’t think it is silly, they have to also think about the other end of the spectrum, like 139 gr sp projectiles in the 7 rm. they still have to shoot accurately and not blow up in mid air. and...

    Liked On: 05-09-2024, 05:19 PM

Page 15 of 173 First 123456789101112131415161718192021222324252627282965115 ... Last

• Jump to page: