Gkp
Member

1356 Likes

Page 8 of 91 First 1234567891011121314151617181920212258 ... Last

• Jump to page:

1. 
   Gkp liked post by McNotty On thread : Another Sausage guide

   Dunninghams if you buy in bulk, but they can be a pain to untangle how much you need. I used these last time. Makes 50kg and cost $60. Come on plastic tubes so you have zero untangling to do. ...

   Liked On: 28-11-2024, 07:06 PM

2. 
   Gkp liked post by McNotty On thread : Another Sausage guide

   Casing Boutique seems like the cheaper deal. https://nz.thecasingboutique.com/products/hog-casing-32-35

   Liked On: 28-11-2024, 07:06 PM

3. 
   Gkp liked post by bigred On thread : Another Sausage guide

   I've found the casing boutique to be the best. Have a wide selection at decent price

   Liked On: 28-11-2024, 07:04 PM

4. 
   Gkp liked post by SPEARONZ On thread : Rimu

   The sun is out to get me. I retire to the high ridge where a light breeze delivers some comfort and the thick canopy creates a dramatic contrast of light and dark. It’s cool amongst the crown...

   Liked On: 28-11-2024, 05:12 PM

5. 
   Gkp liked post by zeropak On thread : Black Friday deal. 25% off site wide

   Hi Guys, our Black Friday deal is short and sweet. 25% off site wide including back orders. We have new stock of Meat processing gear arriving next week which includes the TC8 and TC12 mincers. This...

   Liked On: 28-11-2024, 02:24 PM

6. 
   Gkp liked post by Hunter_Nick On thread : Wapiti Rig

   Bro, your 150sst at the velocity you mentioned is going to hit 1800fps at 500yds at 930hpa (2500’ alt) That’s the minimum recommended velocity for correct bullet performance. Basically you’re good to...

   Liked On: 27-11-2024, 07:27 PM

7. 
   Gkp liked post by Trout On thread : Wapiti Rig

   Hi Ryan,iv been using 308 Hornady Superformance SSTs for the last 20yrs.Theres very little difference in dial up (2clks)from 150gr to 165gr at 400yds.Iv dropped a few big body stags with both out to...

   Liked On: 27-11-2024, 07:26 PM

8. 
   Gkp liked post by Ground Control On thread : 6mm ARC

   My Howa barreled action arrived yesterday and I spent a bit of time setting it up . Put it into a standard Houge stock ( if I end up liking the 6mm ARC I’ll probably upgrade to Carbon) , I had to...

   Liked On: 27-11-2024, 10:30 AM

9. 
   Gkp liked post by Missalot On thread : Load data 22 creedmore

   RL-19 gave me the best speeds with 88eldms at 3300fps, 2213/h4831 best groups with both 88eldm and 80gr hammers, 2209/h4350 goes fairly well too. Hornady publish load data for 22 creed online and I...

   Liked On: 25-11-2024, 09:05 PM

10. 
    Gkp liked post by 199p On thread : 7mm mag to a 6.5prc?

    Go 6mm ya pussy :P

    Liked On: 25-11-2024, 07:37 PM

11. 
    Gkp liked post by Nathan F On thread : 7mm08 appreciation thread

    Two spikers from last night. 80 yds. Two shots bang flop. 120gn Barnes triple shocks 263887

    Liked On: 25-11-2024, 05:47 AM

12. 
    Gkp liked post by Nathan F On thread : 7mm08 appreciation thread

    Just started with Barnes 120gn tipped triple shocks. 3 from 3 now with devastating terminal performance. Here’s a hind shot the other night at around 60-70 yds - entry 260339 And exit - welded to...

    Liked On: 25-11-2024, 05:47 AM

13. 
    Gkp liked post by Kelton On thread : 7mm08 appreciation thread

    Defiance action that was destined to be a 22gt but then my 22-204 fill in rifle done so well I changed over to the 708 16” 8twist bartlien 2b same manners stock you handled triggertech trigger...

    Liked On: 25-11-2024, 05:46 AM

14. 
    Gkp liked post by andyanimal31 On thread : Scope musings

    Been the NF slut I am I reckon the ultimate nz do every thing is the nx8 2.5×20.sfp. Yes there are lighter cheaper scopes but you will never regret the rugged reliable repeatable mantra of NF. ...

    Liked On: 22-11-2024, 08:20 PM

15. 
    Gkp liked post by CalibreWalker On thread : Scope musings

    Cheers. I'll see if I can find an NXS locally for a look. I think Hamills may have a couple NF on hand.

    Liked On: 22-11-2024, 04:30 PM

Page 8 of 91 First 1234567891011121314151617181920212258 ... Last

• Jump to page: