Gkp
Member

1356 Likes

Page 82 of 91 First ... 32686970717273747576777879808182838485868788899091 Last

• Jump to page:

1. 
   Gkp liked post by 25 /08 IMP On thread : 6.5 prc loads

   I'm picking you will push them faster than that with a 22" Sent from my CPH1903 using Tapatalk

   Liked On: 30-05-2020, 07:08 PM

2. 
   Gkp liked post by Scott29er On thread : 2020 SHOT STAGS

   I had to drop down into the crappy creek bush to shoot this stag. Incredibly nasty bush with the creek bed the best way to travel. The wind wasn't quite right for much of the time and once I was into...

   Liked On: 30-05-2020, 02:40 PM

3. 
   Gkp liked post by Happy Jack On thread : Please recommend a 5 day suitable pack please

   I'm using Aarn packs with front pouches a lot these days, especially if not going to be using it for bush bashing. I also use it for SAR work as its so useful having things to hand without removing...

   Liked On: 25-05-2020, 07:09 PM

4. 
   Gkp liked post by 25 /08 IMP On thread : 6.5 prc loads

   I know it's not a PRC but both those powders work well in a .260 with me being able to load 1.7 grns more RL26 than superprofrmance for 2880fps with 26 and 2843fps with superprofrmance but this is...

   Liked On: 25-05-2020, 10:58 AM

5. 
   Gkp liked post by dvk-kp On thread : Cleaning Stag head

   Also be careful if you use the waterblaster. My missus pointed it down the spinal cord hole into the skull and got covered in cooked brains, gees did I laugh!

   Liked On: 24-05-2020, 11:07 PM

6. 
   Gkp liked post by bumblefoot On thread : 2020 SHOT STAGS

   My first ever deer with some antler on top on Sunday! I'm still pumped today; 2-days later! Trusty little 223 did the job :) 140135

   Liked On: 24-05-2020, 06:09 PM

7. 
   Gkp liked post by Tahr On thread : 2020 SHOT STAGS

   Putting this up for Brian 140144 140145

   Liked On: 24-05-2020, 06:08 PM

8. 
   Gkp liked post by dannyb On thread : can't leave well enough alone 7mm rem mag 180gn eldm and VLD

   Back at the range this morning and good results put 4 shots into a .34" group unfortunately I muffed the 5th but that's on me I'm still getting used to shooting this rifle. Got consistent speed with...

   Liked On: 19-05-2020, 06:03 PM

9. 
   Gkp liked post by The Claw On thread : 7mm Blaser Mag and 2217 or 2225

   I wasn't there when Blair shot it so haven't seen the target. He said it took 3 to get a rough zero then put magnetospeed on. Next 4 were pretty average then he took off the brake (just a random...

   Liked On: 17-05-2020, 05:56 PM

10. 
    Gkp liked post by Kelton On thread : can't leave well enough alone 7mm rem mag 180gn eldm and VLD

    I was slugging 180 bergers at 3060 in a smaller case with 69 gn:cool: 2225 always worked well for me in 7rm with the 162s 73gn fed 215 . id try 168 vld if i came into another rem mag and melt the...

    Liked On: 14-05-2020, 08:39 PM

11. 
    Gkp liked post by 300_BLK On thread : Lone Peak 300 Norma Magnum

    I got my 300 Norma Magnum back from Hardy Rifle recently. They did the build for me and I sourced all the parts from camo wsm, Kiwi Greg, NZRAC, NZ Ammo & Custom Guns. Hardies were kind...

    Liked On: 13-05-2020, 07:24 PM

12. 
    Gkp liked post by Kelton On thread : 156 eol 6.5 saum

    Wrote a blurb phone died lost it so in brief here qe are .. After what felt like forever got a load going was simple in the end user error and some helpfull advice from The Claw showed me i was...

    Liked On: 12-05-2020, 09:02 PM

13. 
    Gkp liked post by cameronjackwhite On thread : Custom actions

    camo wsm was the first custom builder I've used and I dare say the last. Highly reccomend

    Liked On: 10-05-2020, 06:10 PM

14. 
    Gkp liked post by SlimySquirrel On thread : Tikka t3 light weight mods

    I have that trigger spring. It’s a decent little spring and makes the trigger a bit nicer. Can anyone get Triggertech to make one for the Tikka..... I’d be all over one

    Liked On: 05-05-2020, 06:03 PM

15. 
    Gkp liked post by Hunty1 On thread : Tikka t3 light weight mods

    Gkp have similar thing, two tikka's two different triggers. One has the adjustment screw set about 3/4 out and is perfect crisp 2lb, other is wound right out and a rough 3lb. I tried swapping the...

    Liked On: 05-05-2020, 07:50 AM

Page 82 of 91 First ... 32686970717273747576777879808182838485868788899091 Last

• Jump to page: