gqhoon
Member

307 Likes

Page 4 of 21 First 123456789101112131415161718 ... Last

• Jump to page:

1. 
   ishoot10s liked post by gqhoon On thread : New work rig setup and advice

   Endless Air in Aussie do kits for engine driven compressors. Not sure if they do a kit for Merc, but they have universal kits that can be adapted for most applications. Add a pressure switch,...

   Liked On: 14-07-2022, 05:35 PM

2. 
   csmiffy liked post by gqhoon On thread : STRAIGHTENING A CROOKED BULLET

   Mark the projectile with a Sharpie around the top of the neck of the case. But it in your kinetic bullet puller and give it a few taps so you can see that it’s come out a hundred thou or so (more the...

   Liked On: 10-07-2022, 09:35 AM

3. 
   XR500 liked post by gqhoon On thread : Maxi Trac Gear Bag - lying pricks

   https://www.mitre10.co.nz/shop/stanley-fatmax-hard-base-tool-bag-450mm/p/329260 Get one with a hard base, so the arse doesn't fall out of it.

   Liked On: 06-07-2022, 07:25 PM

4. 
   Longranger liked post by gqhoon On thread : What reputable caliper manufacturers are out there?

   Mitutoyo Digi calipers https://tradetools.co.nz/products/mitutoyo-caliper-digital-150mm-6-no-data-output-500-196-31

   Liked On: 21-06-2022, 02:07 PM

5. 
   7mm Rem Mag liked post by gqhoon On thread : What reputable caliper manufacturers are out there?

   Mitutoyo Digi calipers https://tradetools.co.nz/products/mitutoyo-caliper-digital-150mm-6-no-data-output-500-196-31

   Liked On: 21-06-2022, 12:27 PM

6. 
   Sideshow liked post by gqhoon On thread : What reputable caliper manufacturers are out there?

   Mitutoyo Digi calipers https://tradetools.co.nz/products/mitutoyo-caliper-digital-150mm-6-no-data-output-500-196-31

   Liked On: 21-06-2022, 11:58 AM

7. 
   johnd liked post by gqhoon On thread : FX 120i and auto trickler

   This is the history to its development https://supertrickler.com.au/about/ Jump on their Facebook page and have a look at the videos of its development and testing also. It hasn't had the extent...

   Liked On: 19-06-2022, 06:59 PM

8. 
   dannyb liked post by gqhoon On thread : FX 120i and auto trickler

   This is the history to its development https://supertrickler.com.au/about/ Jump on their Facebook page and have a look at the videos of its development and testing also. It hasn't had the extent...

   Liked On: 19-06-2022, 05:34 PM

9. 
   johnd liked post by gqhoon On thread : FX 120i and auto trickler

   I’ve got a A&D300 with V4 and it’s life-changing compared to the RCBS Chargemaster I used to have! Not from a speed perspective (both throw about the same rate), but from the peace of mind that the...

   Liked On: 18-06-2022, 07:18 PM

10. 
    Roarless20 liked post by gqhoon On thread : Frustrating arvo at the range. Powder charges.

    It is literally the basis of his load development process. From his website, copied and paste below: Load Tuning: Powder charge/Primer testing: 1. Select 2-3 primers to test 2. Select...

    Liked On: 29-04-2022, 10:41 PM

11. 
    Micky Duck liked post by gqhoon On thread : Frustrating arvo at the range. Powder charges.

    It is literally the basis of his load development process. From his website, copied and paste below: Load Tuning: Powder charge/Primer testing: 1. Select 2-3 primers to test 2. Select...

    Liked On: 26-04-2022, 10:55 PM

12. 
    Pointer liked post by gqhoon On thread : 20Ga Semis -

    I had both 20G Beretta A400 and Benelli Sport II. In the end I sold the A400 as I couldn’t get used to the movement of the kick-off during recoil. Ran a variety of steel loads through them both,...

    Liked On: 26-04-2022, 04:27 PM

13. 
    Moa Hunter liked post by gqhoon On thread : Frustrating arvo at the range. Powder charges.

    Depends what you’re objective is. For a hunting set-up, it’s probably not necessary to continue with the chronograph during seating depth test. But it is worth knowing that your velocity may change...

    Liked On: 26-04-2022, 08:40 AM

14. 
    Micky Duck liked post by gqhoon On thread : 20Ga Semis -

    I had both 20G Beretta A400 and Benelli Sport II. In the end I sold the A400 as I couldn’t get used to the movement of the kick-off during recoil. Ran a variety of steel loads through them both,...

    Liked On: 25-04-2022, 03:10 PM

15. 
    mikee liked post by gqhoon On thread : 20Ga Semis -

    I had both 20G Beretta A400 and Benelli Sport II. In the end I sold the A400 as I couldn’t get used to the movement of the kick-off during recoil. Ran a variety of steel loads through them both,...

    Liked On: 25-04-2022, 02:54 PM

Page 4 of 21 First 123456789101112131415161718 ... Last

• Jump to page: