Grubby
Member

22 Likes

Page 2 of 2 First 12

• Jump to page:

1. 
   Grubby liked post by Robojaz On thread : reloading .270 with 140g nosler balistic tip

   Yep. 140gr accubond with 2209. In Rem XCR. Works well on Tahr out past 500m.

   Liked On: 29-07-2016, 11:37 PM

2. 
   Grubby liked post by Gibo On thread : reloading .270 with 140g nosler balistic tip

   I'll pm what's in my book tonight. If I haven't burnt those 270 pages that is ;)

   Liked On: 29-07-2016, 11:37 PM

3. 
   Grubby liked post by 6mm ackley On thread : reloading .270 with 140g nosler balistic tip

   Have been loading 140 SST with 2213 sc getting 2950fps out of a savage and 1.5 inches at 200m

   Liked On: 29-07-2016, 11:36 PM

4. 
   Grubby liked post by Ryan_Songhurst On thread : reloading .270 with 140g nosler balistic tip

   Gday Max, good choice of caliber, and the 140's are a good all round load for the 270, allthough I prefer 150 LRAB or 150 VLD. I had a load going using 140 interlocks in front of 2213sc, quite an...

   Liked On: 29-07-2016, 11:36 PM

5. 
   Grubby liked post by Micky Duck On thread : reloading .270 with 140g nosler balistic tip

   I get good results using AR2213/H4831 with the 130grn version.

   Liked On: 29-07-2016, 11:36 PM

6. 
   Grubby liked post by Gibo On thread : reloading .270 with 140g nosler balistic tip

   Used 2209 in my tikka with the 140abs. Over adi max but no pressure with norma brass. Was getting 2990 from memory. Super accurate too Few fallow and reds in close and a sika at 430. All sat down...

   Liked On: 29-07-2016, 11:36 PM

7. 
   Grubby liked post by 7mmsaum On thread : reloading .270 with 140g nosler balistic tip

   Yes yes and yes Dynamite on anchoring big Ruahine Redskins at distance

   Liked On: 29-07-2016, 11:36 PM

Page 2 of 2 First 12

• Jump to page: