About gundoc

Basic Information


Age
77
About gundoc
Biography:
Over 50 years as a gunsmith, now semi-retired.
Location:
Central Otago
Interests:
Hunting, pistol shooting, collecting
Occupation:
retired

Statistics


Total Posts
Total Posts
2,244
Posts Per Day
0.64
General Information
Last Activity
Yesterday 07:52 PM
Join Date
22-11-2014
Referrals
1

3943 Likes

  1. Woody
    Woody liked post by gundoc On thread : Micro tig welding .22 chamber?
    Definitely Tig for that,and be prepared to clean up the firing pin hole a bit. I have done them with the arc using a steady hand, the smallest rods, medium amps and dot welding with a water quench...
    Liked On: 06-04-2023, 07:27 PM
  2. Micky Duck
    Micky Duck liked post by gundoc On thread : Micro tig welding .22 chamber?
    Definitely Tig for that,and be prepared to clean up the firing pin hole a bit. I have done them with the arc using a steady hand, the smallest rods, medium amps and dot welding with a water quench...
    Liked On: 06-04-2023, 02:28 PM
  3. timattalon
    timattalon liked post by gundoc On thread : Micro tig welding .22 chamber?
    You don't need a reamer, just a good set of needle files, some 1000 grit wet & dry and a lot of patience.
    Liked On: 05-04-2023, 06:14 AM
  4. timattalon
    timattalon liked post by gundoc On thread : Micro tig welding .22 chamber?
    Most .22 LR barrels are just mild steel and Tig would do just fine. I gas weld them and reset the chamber back to standard specs and it works just fine with no repair visible (it does require a...
    Liked On: 05-04-2023, 06:13 AM
  5. shananah
    shananah liked post by gundoc On thread : Micro tig welding .22 chamber?
    Definitely Tig for that,and be prepared to clean up the firing pin hole a bit. I have done them with the arc using a steady hand, the smallest rods, medium amps and dot welding with a water quench...
    Liked On: 04-04-2023, 08:58 PM
  6. Jhon
    Jhon liked post by gundoc On thread : Micro tig welding .22 chamber?
    Definitely Tig for that,and be prepared to clean up the firing pin hole a bit. I have done them with the arc using a steady hand, the smallest rods, medium amps and dot welding with a water quench...
    Liked On: 04-04-2023, 08:42 PM
  7. csmiffy
    csmiffy liked post by gundoc On thread : Micro tig welding .22 chamber?
    You don't need a reamer, just a good set of needle files, some 1000 grit wet & dry and a lot of patience.
    Liked On: 04-04-2023, 08:09 PM
  8. Woody
    Woody liked post by gundoc On thread : NZFS ammunition article by Lynn Harris
    In 1966 we were issued the hollow-pointed .303 ball which came in cases of 750 rounds and it did the job fairly well. The NZFS .270 was issued in 130 grain for the more open and longer range shooting...
    Liked On: 04-04-2023, 12:20 PM
  9. zimmer
    zimmer liked post by gundoc On thread : NZFS ammunition article by Lynn Harris
    Yes, CAC did a run of .308 for Alpine Helicopters, h/s .308A.
    Liked On: 04-04-2023, 09:32 AM
  10. Scouterkotare
    Scouterkotare liked post by gundoc On thread : NZFS ammunition article by Lynn Harris
    The NZFS headstamp is not the only end-user example but it is certainly one of the few. Another example I know of is the MDPD pistol ammo of the Metro Dade Police Department (Miami) and there are...
    Liked On: 03-04-2023, 10:07 PM
  11. Scouterkotare
    Scouterkotare liked post by gundoc On thread : NZFS ammunition article by Lynn Harris
    In 1966 we were issued the hollow-pointed .303 ball which came in cases of 750 rounds and it did the job fairly well. The NZFS .270 was issued in 130 grain for the more open and longer range shooting...
    Liked On: 03-04-2023, 10:07 PM
  12. Micky Duck
    Micky Duck liked post by gundoc On thread : NZFS ammunition article by Lynn Harris
    Yes, CAC did a run of .308 for Alpine Helicopters, h/s .308A.
    Liked On: 03-04-2023, 09:23 PM
  13. tetawa
    tetawa liked post by gundoc On thread : NZFS ammunition article by Lynn Harris
    Yes, CAC did a run of .308 for Alpine Helicopters, h/s .308A.
    Liked On: 03-04-2023, 08:59 PM
  14. caberslash
    caberslash liked post by gundoc On thread : NZFS ammunition article by Lynn Harris
    The NZFS headstamp is not the only end-user example but it is certainly one of the few. Another example I know of is the MDPD pistol ammo of the Metro Dade Police Department (Miami) and there are...
    Liked On: 03-04-2023, 07:39 PM
  15. caberslash
    caberslash liked post by gundoc On thread : NZFS ammunition article by Lynn Harris
    In 1966 we were issued the hollow-pointed .303 ball which came in cases of 750 rounds and it did the job fairly well. The NZFS .270 was issued in 130 grain for the more open and longer range shooting...
    Liked On: 03-04-2023, 07:38 PM

14-10-2015


05-09-2015


31-08-2015


06-04-2015


12-01-2015


10-01-2015


02-12-2014



No results to display...
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!