What is the reason you are looking at the bore?
Liked On: 18-06-2022, 08:07 PM
What is the reason you are looking at the bore?
Liked On: 18-06-2022, 05:56 PM
I have never seen such an aggressive eel. Most would swim away at the first touch. A classic case of "this is my pond boy!"
Liked On: 15-06-2022, 10:58 PM
I have never seen such an aggressive eel. Most would swim away at the first touch. A classic case of "this is my pond boy!"
Liked On: 15-06-2022, 09:43 AM
That is simply not possible with shotguns. Matching a fired case to a gun is possible, and matching a wad and shot to a fired case is partially possible, but matching shot to a specific gun is...
Liked On: 12-06-2022, 03:19 PM
The shims need to be used to raise the comb in relation to the barrel. A quick method to check the correct stock cast and height is to mount the gun with your eyes closed, have a friend place a 50...
Liked On: 10-06-2022, 05:36 PM
The shims need to be used to raise the comb in relation to the barrel. A quick method to check the correct stock cast and height is to mount the gun with your eyes closed, have a friend place a 50...
Liked On: 09-06-2022, 07:58 PM
My high country rifle (.30/06 Husqvarna) is bare, just the scope and a wee bit of black tape on the muzzle.
Liked On: 05-06-2022, 09:15 PM
#4 steel shot would not exceed 300 metres, more likely about 250.
Liked On: 05-06-2022, 07:24 PM
That is pretty much the same way as a custom-fitted professional job is done. It can't be done properly unless the shooter is present to ensure correct eye relief.
Liked On: 03-06-2022, 07:47 AM
That is pretty much the same way as a custom-fitted professional job is done. It can't be done properly unless the shooter is present to ensure correct eye relief.
Liked On: 03-06-2022, 05:47 AM
My high country rifle (.30/06 Husqvarna) is bare, just the scope and a wee bit of black tape on the muzzle.
Liked On: 31-05-2022, 11:09 AM
The Sako .22 P94S has a design fault in the bolt locking ring which can cause the bolt handle and locking lug to break off the bolt during opening. This problem is caused by a combination of a steep...
Liked On: 29-05-2022, 03:15 AM
They are made to be used. A quality firearm that is used but kept in top mechanical order by a sensible owner, and then ultimately becomes a collectors item is always more interesting to a collector...
Liked On: 28-05-2022, 10:40 AM
Small Arms International in Great South Road, a well-established business. Go in there and examine the rifle and talk to the staff. SAI have considerable experience in collectable firearms.
Liked On: 26-05-2022, 07:36 AM