The gun needs to be examined and a report produced before it gets into the hands of the dealer/importer. There are potential mechanical failures that could have caused this. I have done several such...
Liked On: 25-04-2022, 09:39 PM
Purchasers should realise that generally, you get what you pay for. Turkish guns are cheap. Having said that, they are much better now than they used to be 20 years ago when the Turks were just...
Liked On: 25-04-2022, 08:14 PM
Purchasers should realise that generally, you get what you pay for. Turkish guns are cheap. Having said that, they are much better now than they used to be 20 years ago when the Turks were just...
Liked On: 25-04-2022, 08:13 PM
Purchasers should realise that generally, you get what you pay for. Turkish guns are cheap. Having said that, they are much better now than they used to be 20 years ago when the Turks were just...
Liked On: 25-04-2022, 08:12 PM
The difference in the MPI of the three loads was negligible at 100 metres. On the hill I tend to use Kentucky windage to suit the conditions in the event of a miss, although I wind on the range...
Liked On: 25-04-2022, 07:03 PM
Purchasers should realise that generally, you get what you pay for. Turkish guns are cheap. Having said that, they are much better now than they used to be 20 years ago when the Turks were just...
Liked On: 25-04-2022, 05:07 PM
The difference in the MPI of the three loads was negligible at 100 metres. On the hill I tend to use Kentucky windage to suit the conditions in the event of a miss, although I wind on the range...
Liked On: 25-04-2022, 05:05 PM
The gun needs to be examined and a report produced before it gets into the hands of the dealer/importer. There are potential mechanical failures that could have caused this. I have done several such...
Liked On: 25-04-2022, 05:02 PM
I did some 5 shot velocity tests with my Pro Chrono today to confirm the similarity of my handloads to factory so that I can use either without change of zero. My rifle is a 1:8 Tikka T3X CTR with a...
Liked On: 25-04-2022, 04:45 PM
The gun needs to be examined and a report produced before it gets into the hands of the dealer/importer. There are potential mechanical failures that could have caused this. I have done several such...
Liked On: 25-04-2022, 04:35 PM
I did some 5 shot velocity tests with my Pro Chrono today to confirm the similarity of my handloads to factory so that I can use either without change of zero. My rifle is a 1:8 Tikka T3X CTR with a...
Liked On: 25-04-2022, 04:33 PM
The usual cause of such problems is a rough chamber, normally caused by trying to take too large cuts. The reamer must be withdrawn , cleaned and lubed, many times, especially when getting near the...
Liked On: 25-04-2022, 02:58 PM
The gun needs to be examined and a report produced before it gets into the hands of the dealer/importer. There are potential mechanical failures that could have caused this. I have done several such...
Liked On: 25-04-2022, 12:33 PM
The gun needs to be examined and a report produced before it gets into the hands of the dealer/importer. There are potential mechanical failures that could have caused this. I have done several such...
Liked On: 25-04-2022, 12:28 PM
The gun needs to be examined and a report produced before it gets into the hands of the dealer/importer. There are potential mechanical failures that could have caused this. I have done several such...
Liked On: 25-04-2022, 10:22 AM