gundoc
Member

3945 Likes

Page 85 of 263 First ... 357172737475767778798081828384858687888990919293949596979899135185 ... Last

• Jump to page:

1. 
   csmiffy liked post by gundoc On thread : Dodgy recoil lug

   Yes, file it with a very slight forward taper and polish the surface with wet & dry backed by the file. Breaking the sharp edges also helps. Bed from the front edge of the mag well to about 50mm up...

   Liked On: 11-02-2022, 07:20 AM

2. 
   Cigar liked post by gundoc On thread : Dodgy recoil lug

   Yes, file it with a very slight forward taper and polish the surface with wet & dry backed by the file. Breaking the sharp edges also helps. Bed from the front edge of the mag well to about 50mm up...

   Liked On: 10-02-2022, 11:32 PM

3. 
   Husky1600 liked post by gundoc On thread : Dodgy recoil lug

   Yes, file it with a very slight forward taper and polish the surface with wet & dry backed by the file. Breaking the sharp edges also helps. Bed from the front edge of the mag well to about 50mm up...

   Liked On: 10-02-2022, 10:28 PM

4. 
   Makros liked post by gundoc On thread : Dodgy recoil lug

   Yes, file it with a very slight forward taper and polish the surface with wet & dry backed by the file. Breaking the sharp edges also helps. Bed from the front edge of the mag well to about 50mm up...

   Liked On: 10-02-2022, 10:14 PM

5. 
   mikee liked post by gundoc On thread : Pistol Storage Rules

   The approvals have to be done by a registered engineer who will sign his name to the certificate, as the Police are not qualified to make such decisions. For a one-off item it will be quite expensive...

   Liked On: 10-02-2022, 02:29 PM

6. 
   300CALMAN liked post by gundoc On thread : Idoits that get firearm licences

   Idiots are a widespread problem. I know of a few similar incidents by our 'trained' Police officers. Most incidents of that sort are caused by lack of attention and no thought given to the potential...

   Liked On: 08-02-2022, 11:54 PM

7. 
   10-Ring liked post by gundoc On thread : Barrel thread

   The Remington M700 thread is 1-1/6"x16 (1.062" x 16) which is the same nominal thread as the Bergara and some other actions but that does not meant they are interchangeable. Barrel thread length,...

   Liked On: 05-02-2022, 08:58 AM

8. 
   csmiffy liked post by gundoc On thread : Legality of Non-Semiautomatic with detatchable magazine

   You are trying flog a dead horse with that lock-open design in Jacindastan! As for 'criminal intent' mentioned by Ben waimata, I am of the opinion that many of the laws of late are being enacted by...

   Liked On: 05-02-2022, 07:53 AM

9. 
   Bill999 liked post by gundoc On thread : Legality of Non-Semiautomatic with detatchable magazine

   You are trying flog a dead horse with that lock-open design in Jacindastan! As for 'criminal intent' mentioned by Ben waimata, I am of the opinion that many of the laws of late are being enacted by...

   Liked On: 04-02-2022, 06:48 PM

10. 
    tetawa liked post by gundoc On thread : Suppressor thread question

    Take it back to the guy who cut the thread, along with suppressor you intend to use. It is a simple job to repair, 15 minutes tops!

    Liked On: 04-02-2022, 07:24 AM

11. 
    timattalon liked post by gundoc On thread : Legality of Non-Semiautomatic with detatchable magazine

    You are trying flog a dead horse with that lock-open design in Jacindastan! As for 'criminal intent' mentioned by Ben waimata, I am of the opinion that many of the laws of late are being enacted by...

    Liked On: 04-02-2022, 05:05 AM

12. 
    tetawa liked post by gundoc On thread : Legality of Non-Semiautomatic with detatchable magazine

    You are trying flog a dead horse with that lock-open design in Jacindastan! As for 'criminal intent' mentioned by Ben waimata, I am of the opinion that many of the laws of late are being enacted by...

    Liked On: 03-02-2022, 08:05 PM

13. 
    XR500 liked post by gundoc On thread : Legality of Non-Semiautomatic with detatchable magazine

    You are trying flog a dead horse with that lock-open design in Jacindastan! As for 'criminal intent' mentioned by Ben waimata, I am of the opinion that many of the laws of late are being enacted by...

    Liked On: 03-02-2022, 07:36 PM

14. 
    Mintie liked post by gundoc On thread : Zero MOA rail/base - why?

    Zero angle bases are easier and cheaper to make. Most centrefire rifles are never used beyond 300 metres and .22's beyond 100 metres so there is absolutely no point in fitting an angled base as those...

    Liked On: 03-02-2022, 12:19 AM

15. 
    Jaco Goosen liked post by gundoc On thread : Barrel thread

    The Remington M700 thread is 1-1/6"x16 (1.062" x 16) which is the same nominal thread as the Bergara and some other actions but that does not meant they are interchangeable. Barrel thread length,...

    Liked On: 02-02-2022, 08:43 PM

Page 85 of 263 First ... 357172737475767778798081828384858687888990919293949596979899135185 ... Last

• Jump to page: