To test it, fit the suppressor without the bushing, you shouldnt run them tight on the barrel. Just be careful not to give the suppressor a big knock without the rear bushing. But it will be just...
Liked On: 02-09-2020, 10:37 PM
To test it, fit the suppressor without the bushing, you shouldnt run them tight on the barrel. Just be careful not to give the suppressor a big knock without the rear bushing. But it will be just...
Liked On: 02-09-2020, 05:42 PM
Solid as, congrats lads!
Liked On: 30-08-2020, 10:38 PM
Yep i run a standard on my 15" 7mm08 pushed pretty hard, its totally fine.
Liked On: 30-08-2020, 10:09 PM
Have a look at all Gregs recoil comparison vids on youtube. Where he compares recoil between his terminator muzzle brakes vs open muzzle and in some vids also compares to suppressors. Probably the...
Liked On: 29-08-2020, 10:26 PM
Have a look at all Gregs recoil comparison vids on youtube. Where he compares recoil between his terminator muzzle brakes vs open muzzle and in some vids also compares to suppressors. Probably the...
Liked On: 29-08-2020, 08:39 PM
Theres some great tips in his vids. The biggest one for me was ES is all about combustion and group size is seating depth. If ES is small but group size is big, play with seating depth. If ES...
Liked On: 28-08-2020, 09:22 PM
Theres some great tips in his vids. The biggest one for me was ES is all about combustion and group size is seating depth. If ES is small but group size is big, play with seating depth. If ES...
Liked On: 28-08-2020, 08:50 PM
Theres some great tips in his vids. The biggest one for me was ES is all about combustion and group size is seating depth. If ES is small but group size is big, play with seating depth. If ES...
Liked On: 28-08-2020, 08:48 PM
Theres some great tips in his vids. The biggest one for me was ES is all about combustion and group size is seating depth. If ES is small but group size is big, play with seating depth. If ES...
Liked On: 26-08-2020, 08:51 PM
Yes, but for what you're loading its doesn't really matter, working with the standard H20 capacity in QL will be quite fine, its not like you're loading on the ragged edge of pressure.
Liked On: 25-08-2020, 06:43 PM
It tells me 2211 fps at just 28,722 psi pressure, with only 79.4% powder burn in that barrel length, so 20% of the powder will be burning after it exits the barrel, might pay to use a Stainless first...
Liked On: 25-08-2020, 06:30 PM
Yes i agree, for your uses you can quite happily get away with a scope much less expensive than a VX5.
Liked On: 25-08-2020, 11:35 AM
Yes agree that class of scope is more than good enough, there is plenty of options of similar class scopes in the 4-12 or 4.5-14 range that will be available 2nd hand at just half the money of a new...
Liked On: 24-08-2020, 05:52 PM
A bit of work pulling it all together, but well worth the...
Liked On: 24-08-2020, 10:31 AM