Yep, get it shooting bang on at 25 yards, then that should put you about 2.5" ish high at 100 (at 100 adjust it so that its hitting about 2.5" high) that makes the best use of the maximum point blank...
Liked On: 24-07-2018, 02:40 PM
Put a long action mag and bolt stop in it then you will be able to seat them right out and still easily fit the mag Here's a 284 case with a 162 Amax seated long in a T3 long action mag...
Liked On: 24-07-2018, 01:10 PM
Oh nice mate, you must have one of the flash new models that have that trick feature that automatically compensates for spin drift at distance, sweet!
Liked On: 24-07-2018, 01:07 PM
Put a long action mag and bolt stop in it then you will be able to seat them right out and still easily fit the mag Here's a 284 case with a 162 Amax seated long in a T3 long action mag...
Liked On: 24-07-2018, 11:52 AM
H414 will be your friend
Liked On: 23-07-2018, 09:29 PM
Oh nice mate, you must have one of the flash new models that have that trick feature that automatically compensates for spin drift at distance, sweet!
Liked On: 23-07-2018, 08:43 PM
Yes, Gunworks did my T3 and have done heaps of others. I believe they are not currently doing them tho, as rechambering Tikka barrels is hard work, something to do with the type of Stainless they...
Liked On: 19-07-2018, 06:02 PM
Yes you are correct, the m595 is a short action. It was a 7mm08 that has been rechambered. I run 150 NBT as a mag fit load. Pushing them at 2970 fps super accurately from the 22" barrel. I can...
Liked On: 19-07-2018, 09:19 AM
I know nothing about the huskys, but do have a bit of experience with 284's (I have a 22" on a M595 Tikka, and a 17" suppressed on a T3). I run 162gr Amax in the 17" 284 and can push them at...
Liked On: 17-07-2018, 07:33 PM
I know nothing about the huskys, but do have a bit of experience with 284's (I have a 22" on a M595 Tikka, and a 17" suppressed on a T3). I run 162gr Amax in the 17" 284 and can push them at...
Liked On: 17-07-2018, 07:18 PM
I've recently had a T2 side ported brake put on my new 28 Nosler. My smith slightly under indexed it to allow for it eventually settling on the shoulder after being taken on and off a few times. ...
Liked On: 15-07-2018, 11:20 PM
I've recently had a T2 side ported brake put on my new 28 Nosler. My smith slightly under indexed it to allow for it eventually settling on the shoulder after being taken on and off a few times. ...
Liked On: 15-07-2018, 06:35 PM
I've recently had a T2 side ported brake put on my new 28 Nosler. My smith slightly under indexed it to allow for it eventually settling on the shoulder after being taken on and off a few times. ...
Liked On: 15-07-2018, 03:14 PM
Thanks, Ive just ordered a set of these knock offs
Liked On: 09-07-2018, 06:40 PM
My new custom 28 Nosler built on a Stiller Predator action, Bartlein 8 twist 26 inch barrel with T2 brake, in a Ken Henderson CF stock. Pushing the 195gr Berger Elite Hunters at 3075 fps. I'm...
Liked On: 07-07-2018, 03:52 AM