GWH
Member

4134 Likes

Page 25 of 276 First ... 111213141516171819202122232425262728293031323334353637383975125 ... Last

• Jump to page:

1. 
   GWH liked post by Cigar On thread : Down loading 243 win to 6x45 velocities

   For slightly higher powered loads, I have found in my 243 (23.5" barrel): 37 grains of AR2209 gives me 2760fps with the 90gr ELD-X 39 grains of AR2209 gives me 2880fps with 90-100gr bullets 40...

   Liked On: 23-04-2022, 01:20 PM

2. 
   GWH liked post by grandpamac On thread : Down loading 243 win to 6x45 velocities

   Dare I say it but that load would work just as well for the elder members of the household. My shooting is almost entirely at targets these days so more and more of my rifles have light loads for...

   Liked On: 23-04-2022, 12:12 PM

3. 
   GWH liked post by 199p On thread : Zeroing for Stalking

   100y man good for everything then

   Liked On: 23-04-2022, 08:36 AM

4. 
   GWH liked post by Micky Duck On thread : Down loading 243 win to 6x45 velocities

   sounds like you have it sorted...80 grns of Mr Speers finest at 2700fps is not to be sniffed at...any deer ,goat or pig is going to be in big trouble. LOVE speer projectiles,they are soft and breakup...

   Liked On: 22-04-2022, 11:02 PM

5. 
   GWH liked post by 7mmsaum On thread : kick arse suppresor ?

   DPT with extra baffles End of story

   Liked On: 20-04-2022, 09:12 PM

6. 
   GWH liked post by Micky Duck On thread : kick arse suppresor ?

   I tried a big long centrefire suppressor and it was good with subs but still cracked with supers....if you getting crack...you going supersonic. NO suppresser will fix that.

   Liked On: 20-04-2022, 09:12 PM

7. 
   GWH liked post by dannyb On thread : kick arse suppresor ?

   My new 22semi is ultra quiet running cci subs and a gunworks fat 22 suppressor, the bolt cycling is louder than any muzzle report

   Liked On: 20-04-2022, 09:11 PM

8. 
   GWH liked post by TLB On thread : 30mm Torch/IR Illuminator mount adjustable for windage and elavation

   Plus one for that. I just used some thin cardboard off a muesli bar or beer box last time and it has been in the quick release mount now for over 6 months no worries.

   Liked On: 15-04-2022, 01:00 AM

9. 
   GWH liked post by Mintie On thread : 30mm Torch/IR Illuminator mount adjustable for windage and elavation

   Just shim it using some beer cans mate

   Liked On: 15-04-2022, 01:00 AM

10. 
    GWH liked post by LBD On thread : DPT tools for separating seized suppressor baffles

    I recently acquired a used suppressor with a build up of carbon to some degree ... I was amazed how well my ultrasonic case cleaner, cleaned the carbon out... took about an hour total.... hot, with a...

    Liked On: 14-04-2022, 08:29 AM

11. 
    GWH liked post by Fat ninja On thread : 30mm Torch/IR Illuminator mount adjustable for windage and elavation

    Could try Fraser at owl optics

    Liked On: 13-04-2022, 06:24 PM

12. 
    GWH liked post by 7mmsaum On thread : Sika hybrid or red?

    Red with a hint of Sika Large eye sockets and nose length of the red

    Liked On: 13-04-2022, 05:06 PM

13. 
    GWH liked post by stagstalker On thread : Sika hybrid or red?

    https://www.nzdahastings.org.nz/wp-content/uploads/2010/11/Withey-System-Guide-Notes.pdf Certainly looks more red then sika in its overall appearance. As others have said, look for the T or the Y...

    Liked On: 13-04-2022, 02:18 PM

14. 
    GWH liked post by Hunty1 On thread : Sika hybrid or red?

    Thanks for the replies, always impressed with the forum knowledge! Definitely a Y shape between the coronets. 194591

    Liked On: 13-04-2022, 02:18 PM

15. 
    GWH liked post by DPT On thread : DPT tools for separating seized suppressor baffles

    Hey, see link for our instructions Suppressor maintenance instructions - DPT Machinists (http://www.dpt.co.nz/cms.php?id_cms=7) This is a snip from the instructions. Your suppressor must be...

    Liked On: 13-04-2022, 12:19 PM

Page 25 of 276 First ... 111213141516171819202122232425262728293031323334353637383975125 ... Last

• Jump to page: