GWH
Member

5124 Likes

Page 277 of 342 First ... 177227263264265266267268269270271272273274275276277278279280281282283284285286287288289290291327 ... Last

• Jump to page:

1. 
   veitnamcam liked post by GWH On thread : DIY steel 'gong' target

   Ok got ya. That pretty much explains it I reckon. Mild steel and a solid or steel core bullet, hence potential for ricochets. If you are shooting standard copper/lead hunting/target type...

   Liked On: 03-11-2016, 07:59 PM

2. 
   veitnamcam liked post by GWH On thread : DIY steel 'gong' target

   Quite simply, I can see the evidence of the bullet splash on the gong Sent from my SM-G900I using Tapatalk

   Liked On: 03-11-2016, 07:58 PM

3. 
   veitnamcam liked post by GWH On thread : DIY steel 'gong' target

   In my experience there's no need to angle them down when shooting at long range as the bullet is basically falling from the sky on that angle anyway. Just hAve them hung from top and able to swing...

   Liked On: 03-11-2016, 07:56 PM

4. 
   BRADS liked post by GWH On thread : DIY steel 'gong' target

   In my experience there's no need to angle them down when shooting at long range as the bullet is basically falling from the sky on that angle anyway. Just hAve them hung from top and able to swing...

   Liked On: 03-11-2016, 07:09 PM

5. 
   BRADS liked post by GWH On thread : DIY steel 'gong' target

   Those plates of mine that you have shot, are 500x500 12mm hardox 450. Nothing has ever marked them. Bullets just disintegrate and spash on impact. When painted white, you are left with a very visable...

   Liked On: 03-11-2016, 07:08 PM

6. 
   Dundee liked post by GWH On thread : DIY steel 'gong' target

   Quite simply, I can see the evidence of the bullet splash on the gong Sent from my SM-G900I using Tapatalk

   Liked On: 03-11-2016, 06:36 PM

7. 
   veitnamcam liked post by GWH On thread : Long range rifle rig photos

   In all the country i hunt, you see plenty of deer at 400-500 yards across gullys etc, and theres no way you can get closer for a shot, and if you were to try and approach them from their side, you...

   Liked On: 03-11-2016, 12:20 PM

8. 
   257weatherby liked post by GWH On thread : 6.5 x 55 (T3) 143g eldx 7828ssc ladder test

   Yeah, i havnt actually tried N560 as yet, but from all the homework ive done thus far it appears to give very similar results to 7828ssc. N560 is just shit loads more expensive!

   Liked On: 02-11-2016, 08:35 PM

9. 
   Blaser liked post by GWH On thread : Long range rifle rig photos

   58259

   Liked On: 02-11-2016, 06:15 PM

10. 
    WallyR liked post by GWH On thread : 6.5 x 55 (T3) 143g eldx 7828ssc ladder test

    Ive not long purchased a T3 Superlight in 6.5x55 and have started working on a load with the 143 gr eld-x. I had a nice accurate load with 46.5g of 2209, running at 2780 fps. But was keen to see...

    Liked On: 02-11-2016, 05:25 PM

11. 
    gadgetman liked post by GWH On thread : Long range rifle rig photos

    In all the country i hunt, you see plenty of deer at 400-500 yards across gullys etc, and theres no way you can get closer for a shot, and if you were to try and approach them from their side, you...

    Liked On: 02-11-2016, 04:16 PM

12. 
    BRADS liked post by GWH On thread : Long range rifle rig photos

    In all the country i hunt, you see plenty of deer at 400-500 yards across gullys etc, and theres no way you can get closer for a shot, and if you were to try and approach them from their side, you...

    Liked On: 02-11-2016, 04:05 PM

13. 
    7mmsaum liked post by GWH On thread : Long range rifle rig photos

    In all the country i hunt, you see plenty of deer at 400-500 yards across gullys etc, and theres no way you can get closer for a shot, and if you were to try and approach them from their side, you...

    Liked On: 02-11-2016, 04:00 PM

14. 
    Mathias liked post by GWH On thread : 6.5 x 55 (T3) 143g eldx 7828ssc ladder test

    Ive not long purchased a T3 Superlight in 6.5x55 and have started working on a load with the 143 gr eld-x. I had a nice accurate load with 46.5g of 2209, running at 2780 fps. But was keen to see...

    Liked On: 02-11-2016, 12:59 PM

15. 
    Tahr liked post by GWH On thread : 6.5 x 55 (T3) 143g eldx 7828ssc ladder test

    Ive not long purchased a T3 Superlight in 6.5x55 and have started working on a load with the 143 gr eld-x. I had a nice accurate load with 46.5g of 2209, running at 2780 fps. But was keen to see...

    Liked On: 02-11-2016, 12:55 PM

Page 277 of 342 First ... 177227263264265266267268269270271272273274275276277278279280281282283284285286287288289290291327 ... Last

• Jump to page: