GWH
Member

4134 Likes

Page 79 of 276 First ... 296566676869707172737475767778798081828384858687888990919293129179 ... Last

• Jump to page:

1. 
   GWH liked post by Freezer On thread : NZ Made Howa Mini Action Parts

   3 weeks away

   Liked On: 05-06-2020, 02:46 PM

2. 
   GWH liked post by Wingman On thread : New 6mm ARC from Hornady

   Its a renamed 6mm Grendel. I have the reamer and a CZ 527 barrel chambered in it if you want to test shoot it. You can use a 6.5 Grendel bushing die with a 6mm neck bush to resize them. I also...

   Liked On: 04-06-2020, 11:34 AM

3. 
   GWH liked post by veitnamcam On thread : Dinner thread?

   Couple of veni shanks and about a kilo of shoulder meat browned up last night and into the slow cooker overnight with a couple of chopped brown onions, this morning added the bacon,...

   Liked On: 02-06-2020, 11:15 AM

4. 
   GWH liked post by On thread : 6.5 grendel load data

   took it for a shoot today had 2 hand loads to try some 90gr speer tnts and some 120 gr speer gold dots new rifle took about 6 shots for the barrel to settle down and then shot a couple of groups...

   Liked On: 01-06-2020, 07:44 PM

5. 
   GWH liked post by Remmodel7 On thread : 6.5 grendel load data

   I fired up the grendal on the weekend (couldn't help myself) and did a quick sight in with hornady black. Shot a few goats with it. Performed well. Only shot out to 150. All seemed to pass through...

   Liked On: 01-06-2020, 07:44 PM

6. 
   GWH liked post by Wingman On thread : 6x45 Rem barrel

   More down time has me tinkering again.. I got thinking.. I run a 223 rem with a 69gr TMK at 3100fps, a .22 TCM with a 40gr Vmax at 3100 fps, a 6x45 with a 75gr Sierra HP at 3000fps, what might a 6mm...

   Liked On: 31-05-2020, 12:56 PM

7. 
   GWH liked post by Flyblown On thread : 6mm Creedmoor goats and deer

   Some nice fattish red hinds for the freezer today. 141241

   Liked On: 30-05-2020, 10:12 PM

8. 
   GWH liked post by Flyblown On thread : 6mm Creedmoor goats and deer

   Some fallow action today. I’m always left slumped in a pile on the floor after a day chasing these cunts, it’s a shit load harder to get onto super observant hill country fallow than I obviously...

   Liked On: 28-05-2020, 10:14 PM

9. 
   GWH liked post by timattalon On thread : BMX handle bar clamp mounts for project?

   I wuld send you to our local recyling place but you are not local so could be a bit awkward. Do you have a local resource recycling centre for bikes etc (usually council owned) Otherwise have a...

   Liked On: 28-05-2020, 01:18 AM

10. 
    GWH liked post by Mooseman On thread : Rabbit Carnage with the 17 Hornet (Short film)

    I used to use a Bruno Fox 222 for Long range shooting rabbits when on the pest board (not the official caliber as I had to use my handloads) but man was that fun on a summer evening when the breeze...

    Liked On: 27-05-2020, 09:02 PM

11. 
    GWH liked post by Pommy On thread : Reloading the .223r to low velocity

    Putting on the ADI salesman hat for a second... I use AP100. It's normally used in pistol cartridges which is makes a lot of folk nervous. About 11gr will give roughly 2400ft/s with a 55gr bullet and...

    Liked On: 27-05-2020, 02:19 PM

12. 
    GWH liked post by Pommy On thread : What little pesties did you bowl over today?

    This counts, right? 140495

    Liked On: 27-05-2020, 02:18 PM

13. 
    GWH liked post by grandpamac On thread : Reloading the .223r to low velocity

    Greetings GWH and All, Agree on poor accuracy and also smoked cases when you get down close to 60% of max with AR2206H but for the .308 and .303 this seems to improve for me once I have worked up to...

    Liked On: 27-05-2020, 01:53 PM

14. 
    GWH liked post by Steelisreal On thread : Reloading the .223r to low velocity

    Lots of reasons - trying to minimise propellant/gas noise whilst increasing performance over a 22LR. Super useful if you don't have the funds to buy a 17 HMR but have a 223. Not sure about the OP's...

    Liked On: 27-05-2020, 01:52 PM

15. 
    GWH liked post by grandpamac On thread : Reloading the .223r to low velocity

    Greetings, Somewhere between 20 and 24 grains of AR2206H (H4895) should give the velocity you want. 20 grains is still well above the 60% of maximum given by Hodgdons for reduced loads with this...

    Liked On: 27-05-2020, 11:26 AM

Page 79 of 276 First ... 296566676869707172737475767778798081828384858687888990919293129179 ... Last

• Jump to page: