homebrew.357
Member

1244 Likes

Page 74 of 83 First ... 24606162636465666768697071727374757677787980818283 Last

• Jump to page:

1. 
   veitnamcam liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   WHAT!!, I`m surrounded by imcompadence ,:XD:, No, a Sharps 45-70 cal is .458" bore, so a grove depth of 0.0065" ,= bore .445", grove .458",:o, well something like that, and it will be only using...

   Liked On: 30-10-2014, 08:04 PM

2. 
   veitnamcam liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   But wait there`s more. The end was cut off, and the hole out of round bit was revealed , my bit was 0.035", not to bad, machined end true to the bore, this will be the muzzle end. Bore was .444" and...

   Liked On: 29-10-2014, 09:43 PM

3. 
   Toby liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   And of cause the piece of de resistance, the barrel with a hole through it. Homebrew.357. PS, Coming soon will be the rifling cutting op.:cool:30604, End machined to bore. 30605, What can I say.

   Liked On: 29-10-2014, 09:15 PM

4. 
   Toby liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   But wait there`s more. The end was cut off, and the hole out of round bit was revealed , my bit was 0.035", not to bad, machined end true to the bore, this will be the muzzle end. Bore was .444" and...

   Liked On: 29-10-2014, 08:05 PM

5. 
   veitnamcam liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Yep, dumb question,:XD:, Who has heard of a Sharps 1874 45-70 with a smooth bore, for that you have to read the start of this thread, :huh:. The real deal, I have just finished making a new cutter...

   Liked On: 29-10-2014, 04:17 PM

6. 
   res liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Yep, dumb question,:XD:, Who has heard of a Sharps 1874 45-70 with a smooth bore, for that you have to read the start of this thread, :huh:. The real deal, I have just finished making a new cutter...

   Liked On: 29-10-2014, 03:33 PM

7. 
   Toby liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Yep, dumb question,:XD:, Who has heard of a Sharps 1874 45-70 with a smooth bore, for that you have to read the start of this thread, :huh:. The real deal, I have just finished making a new cutter...

   Liked On: 29-10-2014, 02:48 PM

8. 
   steven liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Hi All, This is how I drilled, reamed and cut rifle a barrel in my lathe. My lathe is belt driven and .900" centres ,I made some attachments to fit on the lathe so I could do this, never thinking it...

   Liked On: 29-10-2014, 01:46 PM

9. 
   Toby liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

   Well I`ll be blowed, I knew Tony at the NZDA, he would come to the bench rest shoot, pull out a length of 3x2" with a truck axle barrel ,98 action on it in .308 cal, scope on top and proceed to shoot...

   Liked On: 28-10-2014, 05:52 PM

10. 
    Toby liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi, Yes , The power steering pump will put out more presser , but in this case it is the hole in the gun drill that gives the presser. So to start things going, the gun drill is in the guide 1/16"...

    Liked On: 26-10-2014, 08:02 AM

11. 
    ishoot10s liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi, Yes , The power steering pump will put out more presser , but in this case it is the hole in the gun drill that gives the presser. So to start things going, the gun drill is in the guide 1/16"...

    Liked On: 25-10-2014, 10:35 PM

12. 
    308 liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi, Yes , The power steering pump will put out more presser , but in this case it is the hole in the gun drill that gives the presser. So to start things going, the gun drill is in the guide 1/16"...

    Liked On: 25-10-2014, 09:40 PM

13. 
    veitnamcam liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    Hi, Yes , The power steering pump will put out more presser , but in this case it is the hole in the gun drill that gives the presser. So to start things going, the gun drill is in the guide 1/16"...

    Liked On: 25-10-2014, 08:44 PM

14. 
    Ruger liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    The junction box, Chip catcher full , motor and pump, 30019300223002530028, Lots of chips, :cool:,Homebrew.357.

    Liked On: 21-10-2014, 06:14 AM

15. 
    res liked post by homebrew.357 On thread : Making a Sharps Barrel in my lathe.

    The junction box, Chip catcher full , motor and pump, 30019300223002530028, Lots of chips, :cool:,Homebrew.357.

    Liked On: 15-10-2014, 06:24 PM

Page 74 of 83 First ... 24606162636465666768697071727374757677787980818283 Last

• Jump to page: