ishoot10s
Tread carefully in the suck...

718 Likes

Page 12 of 48 First 1234567891011121314151617181920212223242526 ... Last

• Jump to page:

1. 
   Moa Hunter liked post by ishoot10s On thread : What happens when a 50 cal rifle blows up.

   Interrupted thread typically has a much different (meatier) cross section profile, like the old rear-locking Remington bolts. What the maker seems to have used there is a standard triangular profile...

   Liked On: 01-05-2021, 10:45 AM

2. 
   Phil_H liked post by ishoot10s On thread : Remington corelockt miss shapen

   Bent or misshapen tips on bullets work pretty much like the paddle on a Directional Boring Machine. While it's being spun and pushed, it goes straight. When it's just pushed, it changes direction.

   Liked On: 24-04-2021, 02:28 PM

3. 
   Mathias liked post by ishoot10s On thread : Hang fires

   That could even be conditions for the firing pin to hydraulic.

   Liked On: 17-04-2021, 09:19 AM

4. 
   Cordite liked post by ishoot10s On thread : Hang fires

   That could even be conditions for the firing pin to hydraulic.

   Liked On: 17-04-2021, 08:53 AM

5. 
   Moa Hunter liked post by ishoot10s On thread : Hang fires

   That could even be conditions for the firing pin to hydraulic.

   Liked On: 17-04-2021, 12:24 AM

6. 
   Dago liked post by ishoot10s On thread : Hang fires

   That could even be conditions for the firing pin to hydraulic.

   Liked On: 16-04-2021, 09:12 PM

7. 
   Micky Duck liked post by ishoot10s On thread : Hang fires

   That could even be conditions for the firing pin to hydraulic.

   Liked On: 16-04-2021, 09:09 PM

8. 
   Allizdog liked post by ishoot10s On thread : Hang fires

   If factory ammo, old and wet or been wet at some point. If home loads, primer and powder incompatibility, or damp/contaminated. Bolt internals and or action dirty or faulty.

   Liked On: 16-04-2021, 08:48 PM

9. 
   zimmer liked post by ishoot10s On thread : Hang fires

   If factory ammo, old and wet or been wet at some point. If home loads, primer and powder incompatibility, or damp/contaminated. Bolt internals and or action dirty or faulty.

   Liked On: 16-04-2021, 08:23 PM

10. 
    timattalon liked post by ishoot10s On thread : Bike Porn - Regardless of the motor, Show off your "two wheeled" beasties

    I had two GB400's back in the late '80's. The first was a standard TT without the fairing and the second was a TT MK2 with fairing and lobster back single seat. Really neat wee bikes, great fun to...

    Liked On: 10-04-2021, 06:30 PM

11. 
    Gibo liked post by ishoot10s On thread : Thinking of heading in to kaimais in the next couple days

    DavidGunn gave you about as good a tip as you can get considering he lives right there. You could do much worse than check in with him and have a cuppa and a chat on your way in I suspect.

    Liked On: 23-03-2021, 08:54 PM

12. 
    vtkomene liked post by ishoot10s On thread : xr100 engine wtb

    vtkomene, these guys have this one that'd be more suited to a small ATV as its only 4 speed and has reverse and electric start, but they may be able to get you the more basic 2 wheeler version. Main...

    Liked On: 09-03-2021, 12:01 PM

13. 
    matagouri liked post by ishoot10s On thread : Gun Porn, show off your new toys

    veitnamcam you can’t flick both legs out at once like you can with a Harris, each leg has to be unlocked with a push button and rotated. The leg extension adjustment is easy though, easier that the...

    Liked On: 03-03-2021, 06:12 PM

14. 
    veitnamcam liked post by ishoot10s On thread : Gun Porn, show off your new toys

    veitnamcam you can’t flick both legs out at once like you can with a Harris, each leg has to be unlocked with a push button and rotated. The leg extension adjustment is easy though, easier that the...

    Liked On: 03-03-2021, 09:45 AM

15. 
    Beaker liked post by ishoot10s On thread : Gun Porn, show off your new toys

    Pretty impressed with the Backlanz carbon bipod QD system �� Well thought out and very light. 161215 161216

    Liked On: 27-02-2021, 08:28 PM

Page 12 of 48 First 1234567891011121314151617181920212223242526 ... Last

• Jump to page: