Sako 75. Same as mine.
Liked On: 23-06-2023, 07:51 AM
Sako 75. Same as mine.
Liked On: 22-06-2023, 06:37 PM
Ill vouch for the barrels from Hardy. Ive build several rifles and I cant complain about their quality. Dont be afraid to support local
Liked On: 20-06-2023, 09:45 PM
Ill vouch for the barrels from Hardy. Ive build several rifles and I cant complain about their quality. Dont be afraid to support local
Liked On: 19-06-2023, 11:36 PM
Shot 123 Scenars out of my Musgrave at @3140fps. Did not get to shoot red or fallow, but were fortunate enough to shoot several Bluewildebeest, Blesbuck, warthog and springbuck with it. Kills like...
Liked On: 19-06-2023, 06:36 PM
If you are willing to post it down to Wellington Ill help. Im on the Dealers network
Liked On: 11-06-2023, 12:51 PM
The 308 bolt will fit perfectly if your 243 is a T3 or t3x too. Jusy have the headspace checked. Should be good,,but play safe. Happy shopping.
Liked On: 23-05-2023, 09:11 PM
The 308 bolt will fit perfectly if your 243 is a T3 or t3x too. Jusy have the headspace checked. Should be good,,but play safe. Happy shopping.
Liked On: 23-05-2023, 02:13 PM
I should have added. The Accurate chain does not show 100s of pages with loads for different calibres. The author was a very experienced reloader and set his pen to paper to teach other how to...
Liked On: 21-04-2023, 11:27 AM
Always try to anneal before sizing - this way you'll be able to control the spring back after sizing. Most reloaders does not use a decapping die and thus sizes the cases to remove the primer...
Liked On: 18-04-2023, 10:48 AM
There's a ton of things that could cause the problems. Lets start by measuring a the headspace length on a case fired in the Savage and compare it to that of a case fired in the Howa and them to...
Liked On: 17-04-2023, 08:35 PM
There's a ton of things that could cause the problems. Lets start by measuring a the headspace length on a case fired in the Savage and compare it to that of a case fired in the Howa and them to...
Liked On: 17-04-2023, 08:31 PM
There's a ton of things that could cause the problems. Lets start by measuring a the headspace length on a case fired in the Savage and compare it to that of a case fired in the Howa and them to...
Liked On: 17-04-2023, 08:13 PM
Always try to anneal before sizing - this way you'll be able to control the spring back after sizing. Most reloaders does not use a decapping die and thus sizes the cases to remove the primer...
Liked On: 17-04-2023, 08:08 PM
There's a ton of things that could cause the problems. Lets start by measuring a the headspace length on a case fired in the Savage and compare it to that of a case fired in the Howa and them to...
Liked On: 17-04-2023, 07:25 PM