JaSa
Member

19 Likes

Page 1 of 2 12 Last

• Jump to page:

1. 
   JaSa liked post by anzac_mike On thread : Ugly Annealer - First Impressions

   Well, I took a bit of a punt and bought an Ugly Annealer after speaking to the guys who make them. Ordered 10 days ago, and arrived on Thursday. Today I took it over to see a mate who does a huge...

   Liked On: 21-02-2022, 10:07 PM

2. 
   JaSa liked post by Beavis On thread : ideal barrel length for 223, is there a formula?

   Literally no difference. The difference will be between barrel idiosyncrasies. Some barrels are faster than others, some barrels take a couple hundred rounds to foul up and then will jump in velocity.

   Liked On: 15-11-2021, 10:45 PM

3. 
   JaSa liked post by hotbarrels On thread : Pard nv008

   I have two, one on a .17HMR (Gen1) for rabbits and one on a Creedmore (Gen2 with OLED screen) for deer on private land. They are excellent. Advantages: 1/2 the weight of the Pulsar's While they...

   Liked On: 18-06-2021, 04:28 PM

4. 
   JaSa liked post by BeeMan On thread : Trail camera pics

   Something to look at on a wet day. 168801 168803

   Liked On: 30-05-2021, 11:56 PM

5. 
   JaSa liked post by BeeMan On thread : Trail camera pics

   Samba rut getting close 168659 168660 :thumbsup: Salami on legs

   Liked On: 30-05-2021, 11:56 PM

6. 
   JaSa liked post by Micky Duck On thread : Wild dogs - Discussion

   duck shooting on local beach...wandered down towards my usual spot and spotted this bedraggles poodle type dog standing forlorn in pile of washed up logs...my two went over and sniffed bums (as they...

   Liked On: 16-05-2021, 12:12 PM

7. 
   JaSa liked post by Cigar On thread : 243 Powder an Projectiles

   I disagree. Its 42.4gr :thumbsup:

   Liked On: 11-03-2021, 10:15 PM

8. 
   JaSa liked post by rambo-6mmrem On thread : Bullet pulling related question

   If you want to resize them without decaping just pull the decaping pin out of the die (can’t be done with lee dies as the decaping pin and expander ball is one peice) They need to be sized after...

   Liked On: 10-03-2021, 07:03 PM

9. 
   JaSa liked post by Pongo12 On thread : The velvet is sprouting up. Pics?

   2 weeks ago, hopefully catch up with him sometime 156187

   Liked On: 15-12-2020, 08:56 PM

10. 
    JaSa liked post by Moa Hunter On thread : 162gn ELDM Performance

    Bullet going straight through is a good thing, they dont go far with air vents. I think that the bullet is sucking the bits out not blowing them out. Most dramatic I have seen was goats with 90gr...

    Liked On: 27-09-2020, 11:46 AM

11. 
    JaSa liked post by Mooseman On thread : What a Beauty

    Some of you on the forum will remember the Big Sambar stag we were following on the trail camera's we called PD. This year he never turned up into his rutting grounds and we later heard from Phil...

    Liked On: 10-08-2020, 10:47 PM

12. 
    JaSa liked post by 25 /08 IMP On thread : Short barreled 6.5-284

    I've had both but now use .260 you do get a bit more speed from the AI but at best 100fps maybe less and then there is the mucking around of fire forming. Just stick to a standard 20" .260 or...

    Liked On: 04-08-2020, 07:32 PM

13. 
    JaSa liked post by Taupohunter On thread : 6.5 Creedmore Reloads?

    Yes I agree. 48gr of RL26 pushing 143ELDX in my 18inch CM gave 2650fps half inch groups.

    Liked On: 08-07-2020, 11:04 PM

14. 
    JaSa liked post by Flyblown On thread : 6mm Creedmoor and 108gr ELD-M performance

    Two key aspects to this upfront, which have a huge effect on confidence. Never in my life have I had such an easy cartridge to find a working load for. And never have I had a rifle that dealt out...

    Liked On: 01-06-2020, 05:49 PM

15. 
    JaSa liked post by NewbieZAR On thread : Short deer/pig/goat rifles for the tight stuff (lets see em)

    I shoot a 16" 243 mossberg patriot, i shoot a 85gr sierra flat base varminter at 3020fps with 2209, verified with labradar. I stabilised the forend with epoxy, then i installed 2 qd cups to make it...

    Liked On: 25-04-2020, 06:26 PM

Page 1 of 2 12 Last

• Jump to page: