Jhon
Member

1182 Likes

Page 14 of 79 First 1234567891011121314151617181920212223242526272864 ... Last

• Jump to page:

1. 
   Jhon liked post by sneeze On thread : 7mm-08 reloads extraction issue - thoughts please

   Yes I cant see this being caused by head space either. It is often an issue with the die/chamber relationship. The chamber being on the tight end of the spec and the die on the larger. I talked this...

   Liked On: 01-08-2024, 06:45 PM

2. 
   Jhon liked post by grandpamac On thread : 7mm-08 reloads extraction issue - thoughts please

   Greetings, I am pretty sure the problem in not head space. The quoted loads are pretty stiff so the cases will be expanded to snugly fit the chamber. Very light loads can produce extraction issues...

   Liked On: 01-08-2024, 02:41 PM

3. 
   Jhon liked post by Longrun On thread : . 284 users

   284win

   Liked On: 31-07-2024, 11:11 PM

4. 
   Jhon liked post by Makros On thread : 7mm-08 reloads extraction issue - thoughts please

   Doesn't sound like an ammunition problem. If the bolt lifts all the way up, the case should come out freely after this. Lifting the bolt up all the way should engage the primary extraction and...

   Liked On: 30-07-2024, 04:31 PM

5. 
   Jhon liked post by rambo-6mmrem On thread : 7mm-08 reloads extraction issue - thoughts please

   what he said

   Liked On: 30-07-2024, 04:31 PM

6. 
   Jhon liked post by veitnamcam On thread : 7mm-08 reloads extraction issue - thoughts please

   A quick Google of Ruger American extractor issues brings up plenty of results....seems a common issue with the rifle.

   Liked On: 30-07-2024, 10:39 AM

7. 
   Jhon liked post by Basenjiboy On thread : Reloading book shelf

   nag....nag....nag?

   Liked On: 29-07-2024, 09:12 PM

8. 
   Jhon liked post by veitnamcam On thread : 7mm-08 reloads extraction issue - thoughts please

   Unlikely to be a pressure issue if bolt lift is fine. Strip and clean bolt check condition and function of extractor.

   Liked On: 29-07-2024, 09:09 PM

9. 
   Jhon liked post by longshot On thread : 7mm-08 reloads extraction issue - thoughts please

   If it happens again, try pushing it out with a cleaning rod, just to see how much resistance there is.

   Liked On: 29-07-2024, 09:09 PM

10. 
    Jhon liked post by Allgood On thread : 7mm-08 reloads extraction issue - thoughts please

    Polish the chamber...

    Liked On: 29-07-2024, 09:09 PM

11. 
    Jhon liked post by Micky Duck On thread : 7mm-08 reloads extraction issue - thoughts please

    seems weird its the third round both times and lets go later..so heat is part of equasion...POSSIBLY the necks are slightly long?? give chamber a good clean and try again perhaps???have you any...

    Liked On: 29-07-2024, 08:52 PM

12. 
    Jhon liked post by lau lau On thread : 7mm-08 reloads extraction issue - thoughts please

    I found decent accuracy at 42.2-42.5gr 2208 with the 139gr sst. Isn't abit of crap under the ejector claw which is preventing extraction. Had this happen with a tikka years ago

    Liked On: 29-07-2024, 08:51 PM

13. 
    Jhon liked post by Trav-6mmrem On thread : 7mm-08 reloads extraction issue - thoughts please

    Scratch that, I was looking at 140gr load data not 139gr

    Liked On: 29-07-2024, 08:51 PM

14. 
    Jhon liked post by akaroa1 On thread : Cast Lead Thread ?

    Time for some more cast lead I finally got a mould I've often thought might be useful to have in the mould hoard Lyman 457 330 grain hollow point Gould mould My new old Army & Navy 45-60...

    Liked On: 26-07-2024, 10:24 PM

15. 
    Jhon liked post by timattalon On thread : Looking for load data for 303 british

    Thats very close to what I am doing with the 2209. I started in the middle of the min/max suggestions in the ADI book and got the above load. It worked very well. I figured that going to the max to...

    Liked On: 26-07-2024, 01:03 PM

Page 14 of 79 First 1234567891011121314151617181920212223242526272864 ... Last

• Jump to page: