Jhon
Member

1182 Likes

Page 5 of 79 First 1234567891011121314151617181955 ... Last

• Jump to page:

1. 
   Jhon liked post by timattalon On thread : Rip off of the week

   Mate...You should try a Honda Valkyrie...I did the carb fuel tube seals on mine not long after I got it. There is two banks of 3 carbs (6 in total) and the fuel goes through tubes between the carbs...

   Liked On: 14-12-2024, 04:40 PM

2. 
   Jhon liked post by John Duxbury On thread : ZKK-600 7x57 Hard to chamber

   The 6.5x55 does have some difference between Us and Euro specs, but the old 7x57, grandfather of everything, never has. The 7x57 is my favourite. (Along with the .30/06 - and also the .308! I am a...

   Liked On: 14-12-2024, 12:50 PM

3. 
   Jhon liked post by Billymavs On thread : ZKK-600 7x57 Hard to chamber

   Matching serial and headspace is perfect, original serial and not force matched.

   Liked On: 12-12-2024, 02:52 PM

4. 
   Jhon liked post by Bhess On thread : Sentencing over thermal shooting death.

   Im amazed at the 40% reduction in sentence for "good character" with previous conviction that would not allow him to have a licence and 1.4kg of weed packaged up in his house, along with other...

   Liked On: 10-12-2024, 07:54 AM

5. 
   Jhon liked post by Crusty On thread : 303 Query

   I have been reloading and shooting 303 for 20+ years. I'm up to 11+ reloads on my RP brass. - Use cases in one rifle only - Neck size with Lee Collet Dies - Full loads using AR2209 and 174gr...

   Liked On: 18-11-2024, 07:08 AM

6. 
   Jhon liked post by 30.06king On thread : Ruger Walkabout

   Hi Ben Waimata I'm 100% Kiwi, but if I was American would hope to be Texan. Just love much of what Texas has. Yes, overkill for sure using the 243W, but I love shooting it. Sure beats underkill,...

   Liked On: 17-11-2024, 01:15 PM

7. 
   Jhon liked post by MB On thread : Tool for us older buggers

   It was one of those things I put together when I started hunting, then never used because it was just more crap to carry. I tested it on my son who was about 5 years old at the time and it worked...

   Liked On: 15-11-2024, 12:14 PM

8. 
   Jhon liked post by Tokoroa Cast Projectiles On thread : Questions Regarding .303 British

   The Hornady COL is 2.945", your rifling will be miles away from that; and if you do slug the barrel it will be closer to .314" than .312" the 174 RN is the best bullet to use the 150 gr is too...

   Liked On: 15-11-2024, 12:05 PM

9. 
   Jhon liked post by John Duxbury On thread : Questions Regarding .303 British

   I wouldnt fuck with a Rottweiler who had his own a .303

   Liked On: 15-11-2024, 12:04 PM

10. 
    Jhon liked post by John Duxbury On thread : Questions Regarding .303 British

    AR2209 is perfect for the .303*. And those Hornady 174grain RN** were intended for your rifle. Don't worry about whether its .311 or .312 on the packet. It's a well known bullet for the Lee Enfields....

    Liked On: 15-11-2024, 12:04 PM

11. 
    Jhon liked post by buzzmann On thread : Reloading Process and Steps Performed

    Load 50 rounds sight in sell gun[emoji2369] Sent from my iPhone using Tapatalk

    Liked On: 13-11-2024, 08:13 PM

12. 
    Jhon liked post by John Duxbury On thread : .270 is the best caliber ever made.

    There is nothing out of fashion about a skinny 130 grain 7mm bullet at 3100 fps. If we invented it today it would be a wonder hit. Marketing would call it the .277 Precision Annihilator. Delta...

    Liked On: 13-11-2024, 08:12 PM

13. 
    Jhon liked post by John Duxbury On thread : A New Mistake...

    And then you make me carry your heads out for you as well. I'm not sure how this happens.

    Liked On: 12-11-2024, 03:42 AM

14. 
    Jhon liked post by John Duxbury On thread : A New Mistake...

    "Jinx" is too light a word. The next time we go out I will just take the jammed up die with me, lie it on the ground and stare at it and meditate on my failures for a week. Soon as I get more...

    Liked On: 12-11-2024, 03:42 AM

15. 
    Jhon liked post by bluecod On thread : A New Mistake...

    hi james i have had stuck cases before i just drilled out the primer hole and wound in a self taper screw the clamped the screw in the vice and with a brass rod taped the die body screw usually hold...

    Liked On: 12-11-2024, 03:41 AM

Page 5 of 79 First 1234567891011121314151617181955 ... Last

• Jump to page: