jim160
Member

241 Likes

Page 1 of 17 123456789101112131415 ... Last

• Jump to page:

1. 
   dannyb liked post by jim160 On thread : Pump action rifles dilemma FSA making threats ?

   Werent pump action rifles banned during the buy back I think, close to 5 years ago.

   Liked On: 01-10-2024, 09:06 PM

2. 
   lee308 liked post by jim160 On thread : 45/70 reloading

   2F or 3F black powder would work fine. Otherwise data is in most of the reloading books

   Liked On: 16-09-2024, 09:36 PM

3. 
   sharps no 1 liked post by jim160 On thread : 45/70 reloading

   2F or 3F black powder would work fine. Otherwise data is in most of the reloading books

   Liked On: 16-09-2024, 08:17 PM

4. 
   Micky Duck liked post by jim160 On thread : 45/70 reloading

   2F or 3F black powder would work fine. Otherwise data is in most of the reloading books

   Liked On: 16-09-2024, 08:15 PM

5. 
   maxz liked post by jim160 On thread : SSRNZ Rifle In 308

   His rifles are pretty good. I had one of his prototypes and shot 10 shot single hole groups at 100m. Not sure what they are worth, but there aren't made anymore. It's an interesting design for...

   Liked On: 08-02-2024, 11:32 AM

6. 
   Old_School liked post by jim160 On thread : 44-40 ammo

   I buy all.my cast projectiles from someone else. I have all the gear to cast my own, but it's cheaper and easier for me to get them from someone else. The only ones I cast are the .459...

   Liked On: 04-06-2023, 11:21 PM

7. 
   m101a1 liked post by jim160 On thread : 44-40 ammo

   I buy all.my cast projectiles from someone else. I have all the gear to cast my own, but it's cheaper and easier for me to get them from someone else. The only ones I cast are the .459...

   Liked On: 04-06-2023, 01:03 PM

8. 
   rossi.45 liked post by jim160 On thread : 44-40 ammo

   I buy all.my cast projectiles from someone else. I have all the gear to cast my own, but it's cheaper and easier for me to get them from someone else. The only ones I cast are the .459...

   Liked On: 04-06-2023, 12:12 PM

9. 
   Old_School liked post by jim160 On thread : 44-40 ammo

   I loaded for years with a single stage press, but now load with a Square Deal press. Much easier but I've learnt lots along the way. Crushed plenty of cases and figured out that the old cases are a...

   Liked On: 03-06-2023, 05:11 PM

10. 
    Micky Duck liked post by jim160 On thread : Black Powder Rifle Dilemma

    What's the barrel length. And what a clean bench. I wish mine was that tidy. Actually I wish I could find the bench.

    Liked On: 02-06-2023, 09:31 PM

11. 
    Old_School liked post by jim160 On thread : 44-40 ammo

    And I've only ever shot lead through mine. CAS rules so thats just the way it is. Lead projectiles are much cheaper also

    Liked On: 01-06-2023, 12:30 PM

12. 
    Old_School liked post by jim160 On thread : 44-40 ammo

    Yes reloading is the most economical way to shoot it, if you can find the brass. There is bound to be someone up that way who could load some ammo for you.

    Liked On: 01-06-2023, 12:30 PM

13. 
    Micky Duck liked post by jim160 On thread : Subsonic load for 308

    I will flag the 208gr or heavier. Will stick with the 150gr ones. And then leave it with the 8.5gr trail boss at 1040fps. Might have to modify slightly with cast projectiles but not by much if any

    Liked On: 11-08-2022, 09:32 PM

14. 
    yeah_na_missed liked post by jim160 On thread : Must haves in the Medical Kit

    I carry the same. Whilst not ideal in summer, I carry some tracer rounds for signalling if I get lost. And aside from what people think, tampons are not good for wound management.

    Liked On: 09-06-2022, 06:49 PM

15. 
    Moa Hunter liked post by jim160 On thread : Other Peoples Handloads. Prizes and Pitfalls.

    I never use anyone elses reloads. Had one where i had to use a hammer to open the bolt, and another shotgun round where i was lucky it was the bottom barrel or else it would have breached. Had to...

    Liked On: 28-12-2020, 09:51 AM

Page 1 of 17 123456789101112131415 ... Last

• Jump to page: