BINGO........ bipod directly on table will bounce....LIGHTLY on top of scope is lukewarm,neither here nor there,the bipod isnt loaded,rifle can still bounce,other hand on butt...yip hug...
Liked On: 15-01-2022, 05:45 PM
I've never been a fan of so called breaking in a new barrel. Never found it made the slightest difference. With a Tikka it has already been shot 3 times at the factory plus an additional 2 shot proof...
Liked On: 15-01-2022, 05:45 PM
THIS as MD mentions ... I cannot shoot my lightweight carbon 338 lap off the bipod on anything resembling a hard surface or the rifle jumps all over the place like a flea on steroids . Even just...
Liked On: 15-01-2022, 05:45 PM
Breaking in barrels is a discussion that will likely not be solved in our lifetime. But and it is a big BUT...the break in procedure has another effect that is very helpful. And I do it with my...
Liked On: 15-01-2022, 05:45 PM
iv found that fiochi ammo to be very average in my .308
Liked On: 15-01-2022, 05:45 PM
Greetings JimmyJames and all, Reading through some of the responces and looking at what could only generously called groups it strikes me that something serious is out of whack. The fact you managed...
Liked On: 15-01-2022, 05:45 PM
How much you want for this piece of shit tikka?;)
Liked On: 15-01-2022, 05:39 PM
^ bipod on a table (hard surface) can be the culprit. I always chuck something soft underneath (like a towel folded in half).
Liked On: 14-01-2022, 10:58 PM
Yeh I agree, I wouldn’t do anything drastic just confirm things are snug/tight and up the target a fraction as per suggestions made above. Heat mirage would be terrible at the moment doing...
Liked On: 14-01-2022, 10:51 PM
There could be an oddball factor like the mounts being out of line with the bore and then a parallax error at 200 - make sure everything is straight and in line as well as the other checks
Liked On: 14-01-2022, 10:44 PM
Don't touch anything , get your target shooter to have a go . Shooting at 100 is one thing but shooting at a greater distance is something else , it is not as easy as some would have you believe .
Liked On: 14-01-2022, 10:43 PM
When i buy a new rifle i take the stock off and file down the edges of the barrel channel on stock,file down the 2 ribbs in the bottom of the barrel channel so nothing is touch the barrel.After the...
Liked On: 14-01-2022, 10:43 PM
Its a Tikka. Its second hand now so its worth about twice what it was in the shop. Pop it on trade me, double your money and buy something else....:thumbsup: All joking aside, when sighting in, I...
Liked On: 14-01-2022, 10:38 PM
As others have said check all scope screws as I would never trust anything that some H&F do. Next time give it a good clean fit the surppressor and set rifle up same as you did last time. And shoot...
Liked On: 14-01-2022, 10:38 PM
meopta
Liked On: 13-10-2021, 12:36 PM