JohnQT
Member

216 Likes

Page 8 of 15 First 123456789101112131415 Last

• Jump to page:

1. 
   JohnQT liked post by 25/08 IMP On thread : Short barrel Creedmoor

   My Sako is 20" and the speed is still up there I'm getting 2810 with 143 ELDX so I wouldn't be to worried about loosing another inch. Sent from my CPH2145 using Tapatalk

   Liked On: 12-04-2023, 01:25 PM

2. 
   JohnQT liked post by Bol Tackshin On thread : Calibre, Rifle & Scope Sugestions For Longer Range Hunting

   500m+ is interesting for shooting with a target shooting rig - long, heavy barrel and a big heavy scope, bipod and bag... For hunting at that distance, with a lightweight rifle, it will require...

   Liked On: 11-04-2023, 10:22 PM

3. 
   JohnQT liked post by zeropak On thread : Calibre, Rifle & Scope Sugestions For Longer Range Hunting

   I assume your a new shooter with little experience in the field. If this is correct then please remember that shooting game at long range is not as easy as point and shoot. Once you get out past say...

   Liked On: 11-04-2023, 10:20 PM

4. 
   JohnQT liked post by jackson21 On thread : Short barrel Creedmoor

   I'd be thinking of running 123gr in a handy 19", you'll hit steel that range no problem but for hunting out to those ranges I'd be thinking something heavier than a 6.5CR, but each to there own.

   Liked On: 09-04-2023, 08:23 PM

5. 
   JohnQT liked post by jackson21 On thread : Short barrel Creedmoor

   Just read your post properly, you'll plink out to that range no problem at all with a 19".

   Liked On: 09-04-2023, 05:49 PM

6. 
   JohnQT liked post by Micky Duck On thread : Short barrel Creedmoor

   if it was still 24" would it be accurate enough for 650-700meters???? and there is answer to your question.

   Liked On: 08-04-2023, 10:54 PM

7. 
   JohnQT liked post by Bol Tackshin On thread : Short barrel Creedmoor

   A shorter barrel of the same diameter is relatively stiffer, and will have less 'whip' as a result of vibration, potentially reducing one of the variables that affect accuracy.

   Liked On: 08-04-2023, 09:33 PM

8. 
   JohnQT liked post by tibo On thread : Short barrel Creedmoor

   You will be fine, just dial for it. That’s a Tikka 6.5cm 20inch at 300m and I’m a shit shooter… 2600fps Tikka are slow 220560

   Liked On: 08-04-2023, 09:33 PM

9. 
   JohnQT liked post by Beetroot On thread : Short barrel Creedmoor

   My 260 with a 19" barrel is doing 2700 with 140s and 2800 with 130s. Id imagine 2600fps with 140s would be fairly easy with the Creedmoor. Accuracy won't be an issue unless the gunsmith messed it...

   Liked On: 08-04-2023, 09:33 PM

10. 
    JohnQT liked post by Pommy On thread : Short barrel Creedmoor

    Assuming one rifle with a 24" barrel and another with a 19" barrel could shoot the same groups at 100m and the only difference was 100fps in velocity, then at 600m you'll have a bit more drop and a...

    Liked On: 08-04-2023, 09:32 PM

11. 
    JohnQT liked post by Micky Duck On thread : Powder Scale Options

    also ..if you set up scales at or close to eye height it makes life easier..I have small wooden box screwed onto my heavy wooden reloading bench,scales sit on top of that with trickler off to side so...

    Liked On: 29-03-2023, 08:35 PM

12. 
    JohnQT liked post by rambo-6mmrem On thread : making the change from 223 to 6.5grendel (maybe even 6mm arc?)

    Longrun 218095 218096 218097 That 223 was going to have a jefferson aswell but after seeing mine and trying the cutdown mag (4 shot) He decided that it wasn’t worth the money The jefferson...

    Liked On: 24-03-2023, 10:51 AM

13. 
    JohnQT liked post by Tentman On thread : Fun with 22s - wee ammo test

    Recently I put my Lithgow LA101 into a laminated stock - they reputedly shoot better in this one than the synthetic. My thoughts were that factory recommended action scew tension of 1.5 Nm (13.7...

    Liked On: 19-03-2023, 07:46 PM

14. 
    JohnQT liked post by Ground Control On thread : Howa good is your Howa? (picture heavy)

    Just thought I'd bring this back up to the top . Here are my two ' Keepers " .223 Fluted 20' heavy barrel , Stocky's Carbon Fibre Stock 308 Fluted 22' Sporter barrel , Hi-Tec Carbon Fibre Stock...

    Liked On: 06-03-2023, 10:47 AM

15. 
    JohnQT liked post by Gkp On thread : Invercargill to Queenstown. Anyone traveling?

    Need to get a rifle from Custom Guns to Queenstown. If anyone is coming up please let me know Cheers G

    Liked On: 28-02-2023, 06:05 PM

Page 8 of 15 First 123456789101112131415 Last

• Jump to page: