Kelton
Member

1865 Likes

Page 101 of 125 First ... 5187888990919293949596979899100101102103104105106107108109110111112113114115 ... Last

• Jump to page:

1. 
   camenzie liked post by Kelton On thread : Ballistic Calc Help

   Good point at Cigar so think that’s common in the Z5

   Liked On: 26-03-2022, 09:42 PM

2. 
   camenzie liked post by Kelton On thread : Ballistic Calc Help

   Up the velocity until your solution is 3 now and then try use that new velocity’s solution at 500 and see if it’s helped?

   Liked On: 26-03-2022, 09:42 PM

3. 
   superdiver liked post by Kelton On thread : What does your suppressed huntimg rifle weigh?

   My 7Saum is 3.4kg bolt in and a dpt mk2 mag can 2b bartlein barrel and a March 2.5x25 not bad for a larger scope and a fat barrel me thinks could be less with a lighter scope and smaller profile...

   Liked On: 24-03-2022, 05:45 PM

4. 
   GWH liked post by Kelton On thread : What does your suppressed huntimg rifle weigh?

   Iv spied them online look neat all right keep the price down by coming unfinished which leaves a lot of options in the world of hydro dipping

   Liked On: 24-03-2022, 08:11 AM

5. 
   CBH Australia liked post by Kelton On thread : 168 Amax 2206H

   As far as I remember they have the little green poly tip? I don’t no what their intention was maybe feeding the fools day preppers I do remember when they were advertised they weren’t for hunting

   Liked On: 23-03-2022, 09:07 PM

6. 
   Rated M for Magnum liked post by Kelton On thread : Zero tech Scopes

   I had the vengeance for the money it was good dialed well was on a range rifle so didn’t get the extreams of low light testing done . It’s now on my mates rifle and he’s liking it so far

   Liked On: 23-03-2022, 12:33 PM

7. 
   Borris liked post by Kelton On thread : 168 Amax 2206H

   Yip iv found a photo of the original load d target and it is 43.6 2206h fed 210s and Winchester brass cheers mate

   Liked On: 23-03-2022, 11:07 AM

8. 
   CBH Australia liked post by Kelton On thread : 168 Amax 2206H

   Yip iv found a photo of the original load d target and it is 43.6 2206h fed 210s and Winchester brass cheers mate

   Liked On: 22-03-2022, 10:49 PM

9. 
   Rated M for Magnum liked post by Kelton On thread : 168 Amax 2206H

   Yip iv found a photo of the original load d target and it is 43.6 2206h fed 210s and Winchester brass cheers mate

   Liked On: 22-03-2022, 10:35 PM

10. 
    superdiver liked post by Kelton On thread : 168 Amax 2206H

    Yip iv found a photo of the original load d target and it is 43.6 2206h fed 210s and Winchester brass cheers mate

    Liked On: 22-03-2022, 09:52 PM

11. 
    Rated M for Magnum liked post by Kelton On thread : Kelly Knight hut hunting

    I did it about 7 years ago on the 22nd of December flew up from Christchurch had a very late night on the 21st at our work knock off flew in to Palmerston North got the old boy to drop me off at the...

    Liked On: 22-03-2022, 09:48 PM

12. 
    Roarless20 liked post by Kelton On thread : Kelly Knight hut hunting

    I did it about 7 years ago on the 22nd of December flew up from Christchurch had a very late night on the 21st at our work knock off flew in to Palmerston North got the old boy to drop me off at the...

    Liked On: 22-03-2022, 08:37 PM

13. 
    stagstalker liked post by Kelton On thread : Kelly Knight hut hunting

    I did it about 7 years ago on the 22nd of December flew up from Christchurch had a very late night on the 21st at our work knock off flew in to Palmerston North got the old boy to drop me off at the...

    Liked On: 22-03-2022, 07:55 PM

14. 
    Longrun liked post by Kelton On thread : rifle set ups

    I’d say bush pigs is 16-18” and less standard bolt face cartridges .308 .284 etc and super pig would be 18-20” magnums . That’s my take on it anyhow

    Liked On: 21-03-2022, 05:42 PM

15. 
    Shot Bro liked post by Kelton On thread : Rem 700 halfcock

    That’s Greg’s half cock I had mine done at gun works years ago no hole in bolt and much better didn’t activate with the safety it activated at “half cocked” must have being a notch that the pin feel...

    Liked On: 19-03-2022, 10:16 AM

Page 101 of 125 First ... 5187888990919293949596979899100101102103104105106107108109110111112113114115 ... Last

• Jump to page: