Double check all your setting are in metric or imperial. I once entered pressure of 29.8 in the metric box (should be more like 1014)...makes a big difference. Kj
Liked On: 15-02-2016, 06:14 PM
Dam it, that is what I wanted to do (because rails are gay!)...but I didn't back myself. Im a huge fan of Talley rings, light, strong, and they sit lower than rails do. Good on you for doing...
Liked On: 12-02-2016, 08:14 PM
Sounds about right. The rail I used was ment to be 20moa, but there was a gap at one end when dry fitted. The gap was about ~0.5mm. I used epoxy to fill it...but in doing so added more MOA. Long...
Liked On: 12-02-2016, 08:14 PM
A day out from a shooting event probably isn't the best time to pull a rifle apart...but hey, that's how the dice is rolled sometimes. So, the rifle was set up as a hunting rifle. It tops out at...
Liked On: 12-02-2016, 06:51 PM
None of you dodgy bastards better not throw a dildo at it:D
Liked On: 11-02-2016, 09:24 AM
A mate I work with (civil engineer, genius who designs bridges) showed me this YouTube clip: https://m.youtube.com/watch?v=MFzDaBzBlL0 I couldn't help myself, so with a little bit of tinkering...
Liked On: 11-02-2016, 08:07 AM
A mate I work with (civil engineer, genius who designs bridges) showed me this YouTube clip: https://m.youtube.com/watch?v=MFzDaBzBlL0 I couldn't help myself, so with a little bit of tinkering...
Liked On: 08-02-2016, 07:52 PM
A mate I work with (civil engineer, genius who designs bridges) showed me this YouTube clip: https://m.youtube.com/watch?v=MFzDaBzBlL0 I couldn't help myself, so with a little bit of tinkering...
Liked On: 07-02-2016, 03:54 PM
A mate I work with (civil engineer, genius who designs bridges) showed me this YouTube clip: https://m.youtube.com/watch?v=MFzDaBzBlL0 I couldn't help myself, so with a little bit of tinkering...
Liked On: 07-02-2016, 02:13 PM
A mate I work with (civil engineer, genius who designs bridges) showed me this YouTube clip: https://m.youtube.com/watch?v=MFzDaBzBlL0 I couldn't help myself, so with a little bit of tinkering...
Liked On: 07-02-2016, 12:34 PM
None of you dodgy bastards better not throw a dildo at it:D
Liked On: 07-02-2016, 11:20 AM
A mate I work with (civil engineer, genius who designs bridges) showed me this YouTube clip: https://m.youtube.com/watch?v=MFzDaBzBlL0 I couldn't help myself, so with a little bit of tinkering...
Liked On: 06-02-2016, 09:40 PM
A mate I work with (civil engineer, genius who designs bridges) showed me this YouTube clip: https://m.youtube.com/watch?v=MFzDaBzBlL0 I couldn't help myself, so with a little bit of tinkering...
Liked On: 06-02-2016, 09:09 PM
A mate I work with (civil engineer, genius who designs bridges) showed me this YouTube clip: https://m.youtube.com/watch?v=MFzDaBzBlL0 I couldn't help myself, so with a little bit of tinkering...
Liked On: 06-02-2016, 06:58 PM
A mate I work with (civil engineer, genius who designs bridges) showed me this YouTube clip: https://m.youtube.com/watch?v=MFzDaBzBlL0 I couldn't help myself, so with a little bit of tinkering...
Liked On: 06-02-2016, 06:50 PM