Kiwi Greg
Terminator Products

6150 Likes

Page 344 of 410 First ... 244294330331332333334335336337338339340341342343344345346347348349350351352353354355356357358394 ... Last

• Jump to page:

1. 
   Blaser liked post by Kiwi Greg On thread : 308 Loads

   Yes but experience has shown me that the ADI/Hodgdon data is reasonably conservative. Imagine a blown up rifle in the States disclaimers or not on a manufactures site....

   Liked On: 05-05-2015, 07:49 PM

2. 
   veitnamcam liked post by Kiwi Greg On thread : 308 Loads

   ADI/Hodgdon data lists the max for 155 & 2208 as 47. I would start at 46 & go up in halves from there, until you are comfortable with the performance & it isn't overloaded. Chuck a Fed 215 in...

   Liked On: 05-05-2015, 07:38 PM

3. 
   Shootm liked post by Kiwi Greg On thread : 308 Loads

   ADI/Hodgdon data lists the max for 155 & 2208 as 47. I would start at 46 & go up in halves from there, until you are comfortable with the performance & it isn't overloaded. Chuck a Fed 215 in...

   Liked On: 05-05-2015, 06:42 PM

4. 
   PERRISCICABA liked post by Kiwi Greg On thread : A Sunday walk

   I've noticed lately my base fitness is pathetic, not sure if its old age or lack of hunting due to my usual haunts from the last 15-20 years being recently bombed with 1080 :oh noes: Could always be...

   Liked On: 05-05-2015, 08:14 AM

5. 
   PERRISCICABA liked post by Kiwi Greg On thread : 22 Terminator

   Here is another 22 Terminator. It happened by accident really, the barrel decided it hurt to much being fluted & tried to escape during one of the last flutes :XD: So it got the flutes profiled...

   Liked On: 05-05-2015, 08:03 AM

6. 
   Norway liked post by Kiwi Greg On thread : A Sunday walk

   I've noticed lately my base fitness is pathetic, not sure if its old age or lack of hunting due to my usual haunts from the last 15-20 years being recently bombed with 1080 :oh noes: Could always be...

   Liked On: 04-05-2015, 12:34 PM

7. 
   nevereadyfreddy liked post by Kiwi Greg On thread : Lapua brass

   That's pretty ordinary certainly not what you are lead to expect, especially for the price. I had some 7-08 RP brass I turned into 308 that all went less than 1 grain different over 60 bits ...

   Liked On: 03-05-2015, 10:04 PM

8. 
   Shootm liked post by Kiwi Greg On thread : Lapua brass

   That's pretty ordinary certainly not what you are lead to expect, especially for the price. I had some 7-08 RP brass I turned into 308 that all went less than 1 grain different over 60 bits ...

   Liked On: 03-05-2015, 12:02 PM

9. 
   veitnamcam liked post by Kiwi Greg On thread : Belmont 130grn 308

   Make sure they feed out of the magazine. Sometimes the big flat hollow point can be problematic. They are an extremely accurate projectile. They can be very explosive if pushed much past...

   Liked On: 30-04-2015, 10:30 PM

10. 
    mikee liked post by Kiwi Greg On thread : PLEASE ADVISE IN RELOAD OR NOT

    Your die needs to be pulled to bits & the brass that is stuck on it needs to be carefully removed by polishing with autosol etc. You need to lube the brass more when sizing it., It is possible...

    Liked On: 29-04-2015, 10:15 PM

11. 
    PERRISCICABA liked post by Kiwi Greg On thread : PLEASE ADVISE IN RELOAD OR NOT

    Your die needs to be pulled to bits & the brass that is stuck on it needs to be carefully removed by polishing with autosol etc. You need to lube the brass more when sizing it., It is possible...

    Liked On: 29-04-2015, 08:33 PM

12. 
    veitnamcam liked post by Kiwi Greg On thread : PLEASE ADVISE IN RELOAD OR NOT

    Your die needs to be pulled to bits & the brass that is stuck on it needs to be carefully removed by polishing with autosol etc. You need to lube the brass more when sizing it., It is possible...

    Liked On: 29-04-2015, 07:59 PM

13. 
    R93 liked post by Kiwi Greg On thread : PLEASE ADVISE IN RELOAD OR NOT

    Your die needs to be pulled to bits & the brass that is stuck on it needs to be carefully removed by polishing with autosol etc. You need to lube the brass more when sizing it., It is possible...

    Liked On: 29-04-2015, 07:58 PM

14. 
    kokako liked post by Kiwi Greg On thread : A T1 Terminator brake inside a suppressor comparison

    I have had the idea of putting a brake inside a suppressor for a year or two but didn't really have anything small enough to try to make it work. After making the T1 Terminator and see how...

    Liked On: 27-04-2015, 09:37 AM

15. 
    Gibo liked post by Kiwi Greg On thread : My 50s starting to look good

    Here are a couple of videos of the Steyr Shooting it with the suppressor :) https://www.youtube.com/watch?v=m-Gx_83Vhis A bit of slow-mo bullet flight.

    Liked On: 22-04-2015, 11:11 AM

Page 344 of 410 First ... 244294330331332333334335336337338339340341342343344345346347348349350351352353354355356357358394 ... Last

• Jump to page: